— 1 —
1. SPECIFICATIONS
1-1. PRINTING SPECIFICATION
Model NO. of Printer Mechanism:
LTPF347A-C576 *1
Printing Method:
Direct Line Thermal
Dot pitch:
8 dot / mm
Printing Speed:
210 mm per second (Max.)
Printing width:
72mm / 576 dots
Character structure:
8 x 16 (font B)
12 x 24 (font A)
Printing Columns:
69 columns / line
46 columns / line
Character Size:
1.00 x 2.00
1.50 x 3.00
Feed Speed:
220 mm per second
Interface:
RS232C (serial)
Input buffer:
8k bytes
Command:
ESC / POS compliant
Paper Width & Diameter:
80 mm (W) x 80 mm Dia. Max.
Thermal head life:
100 Million Pulses / 100 km or more
Cutting method: *2
ACUF324A
Partial cut(one point left uncut) *2
Auto cutter life:
500,000 cuts
Operating time of auto cutter:
600 msec max/cycle
Operating temperature:
0
°
C ~ 40
°
C
Storage temperature:
-20
°
C ~ 50
°
C
Humidity:
80 %
Dimension:
145 mm (W) x 193.2 mm (L) x 120.1 mm (H)
Transfer speed:
Max 38.4 kBps
Supply voltage in standby:
24V DC / 100mA
Mean voltage:
Approx. 1.3 A *3
Power Consumption:
Approx. 4 W *3
Weight:
1.1kg
*1 Manufactured by SIIP&S Inc. (Former name: Seiko Instruments Inc.)
*2 CAUTION: Paper must be fed 3 mm after cutting to prevent paper jam.
*3 These values vary according to environmental temperature when printed font A(12 x 24) with a rolling pattern.
1-2. PAPER SPECIFICATION
Paper Width:
79.5
±
0.5mm (3.13
±
0.02”)
Paper roll size:
Roll diameter:
Maximum 80 mm (3.15”)
Take-up paper roll width:
80 + 0.5/-1.0mm (3.15 + 0.02/-0.04”)
Specified paper:
Specified thermal roll paper:
NTP080-80
[Original paper:TF50KS-E2C Nippon Paper Industries Co., Ltd.]
Packaged roll paper:
[Original paper:PD160R-N (Oji Paper Mfg. Co., Ltd.)]
In Japan: Nakagawa Manufacturing Co., Ltd.
In U.S.A: Nakagawa Mfg. (U.S.A.) Inc.
In Europe: Nakagawa Mfg. (Europe) GmbH
In Southeast Asia: N.A.K. Mfg. (Malaysia) SDN BHD
*The following paper can be used instead of the paper above:
Original paper: HP220AB1 (Mitsubishi Paper Mills Ltd.)
Paper roll spool diameter: Inside
12 mm (0.47”)
Outside 18 mm (0.71”)
NOTE:The end of the paper roll must be free to come off the spool when finished. It must not be adhesively
attached or attached in another semi-permanent manner.
