Casio SP-1300, Техническое руководство

Страница: 6 / 41

— 4 —
2-2 Adjusting the gap between the print head and platen
Follow the instructions below if the size of the gap is not within the standard range.
1. Loosen the screws
1
(in 2 places).
2. Adjust the head gap by rotating the adjusting washer (D). If using a jig, make adjustments from
above. If using a hexagon wrench, make adjustments from below.
Fig. 1-3 Adjustments using a jig
Fig. 1-4 Adjustments using a hexagon wrench
Screw
1
Screw
1
Adjusting washer (U)
Adjusting washer (D)
Raising the platen (the gap shortens)
Platen
Hexagon wrench
3. When the gap has been adjusted according to the instructions above, replace the screws
1
.