manualshive.com logo in svg

Casio QW 5531, Руководство по эксплуатации, Страница: 15 / 26

Поделиться
Скачать
Casio QW 5531 Скачать руководство пользователя страница 15

Adjusting the Time and Day

Setting

1.

Pull out the crown to the second click.

This will cause the indicator window to
show the current Home City.

30

Home City

Crown

Minutes

Hours

2.

Hold down (C) for about 10 seconds.

This causes the second hand to move to
12 o’clock, and enables the minute setting
operation.

3.

Rotate the crown to change the minute
setting.

4.

Press (C).

The hour hand will move slightly,
indicating that the hour setting operation
is enabled.

5.

Rotate the crown to change the hour
setting.

6.

Press (C).

This changes to the year setting
operation.

80

40

90

30

20

50

70

10

60

00

Year (10’s digit)

8

4

9

3

2

5

7

1

6

0

Year (one’s digit)

7.

Rotate the crown to move the hour hand
to the desired setting for the year ten’s
digit, and the minute hand to the desired
one’s digit.

8.

Press (C).

This changes to the month setting
operation.

8

4

9

3

2

5

7

1

10

11

6

12

Month

9.

Rotate the crown to change the month.

10.

Press (C).

The day of the week hand will move
slightly, indicating that the day setting
operation is enabled.

30

Day

●

Changing the date setting will cause the
day of the week hand to rotate
repeatedly.

l

Hand and Day Indicator Movement

11.

Rotate the crown to change the day.

12.

On a time signal at the top of a minute,
push the crown back in.

Note

●

If the watch does not indicate the
correct time even after you adjust it,
correct the hand and date indicator
positions.

l

Using MR-G Connected to Make
Adjustments

l

Using Watch Operations to Make
Adjustments

World Time

World Time lets you look up the current time
in any one of 39 cities around the globe, and
UTC (Universal Coordinated Time).

30

Getting ready

Enter the Timekeeping Mode.

l

Navigating Between Modes

30

Specifying a World Time City

Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also enable
or disable summer time.

Note

●

The initial factory default summer
time setting for all cities is “AT
(AUTO)”. In many cases, the “AT
(AUTO)” setting lets you use the
watch without switching between
summer time and standard time.

1.

Pull out the crown to the first click.

●

You can find out the availability of World
Time location information by checking
the day of the week hand.
“P”: Available
“N”: Not available

30

Crown

Day of the week hand

World Time City

Operation Guide 5531

15

Содержание QW 5531



























Отзывы:

Нет отзывов