manualshive.com logo in svg

Casio QW 5531, Руководство по эксплуатации, Страница: 18 / 26

Поделиться
Скачать
Casio QW 5531 Скачать руководство пользователя страница 18

Configuring Alarm Settings

1.

Pull out the crown to the first click.

This turns on the alarm.

2.

Rotate the crown to change the alarm time
setting.

30

Crown

Minutes

Hours

Alarm on

3.

Push the crown back in.

4.

Press (C) once to return to the
Timekeeping Mode.

Enabling/Disabling the Alarm

1.

Press (B) to toggle the alarm between on
and off.

30

Alarm on

Alarm off

2.

Press (C) once to return to the
Timekeeping Mode.

Stopping an Alarm

While the alarm is sounding, press any button
to stop it.

Illumination Light

The watch has an LED light that you can turn
on for reading in the dark. When you turn on
the LED light, it gradually becomes brighter.
After about two seconds, it gradually becomes
dimmer until it turns off.

Getting ready

Enter the Timekeeping Mode or Alarm Mode.

l

Navigating Between Modes

30

30

Timekeeping Mode

Alarm Mode

Turning On the Illumination

Light

Pressing (A) turns on the light.

30

●

The LED light will turn off automatically if the
alarm starts to sound.

●

The LED light is disabled while the hands
are moving at high speed.

Adjusting Hand and

Day Indicator

Alignment

Strong magnetism or impact can cause the
hands and/or the day indicator to go out of
alignment. If this happens, adjust hand and
day indicator alignment.

●

The watch performs alignment of the hour
hand, minute hand, second hand, and 24-
hour hand automatically.

Adjusting Hand and Day

Indicator Alignment

1.

Pull out the crown to the second click.

2.

Hold down (B) for about five seconds, until
the second hand moves to 12 o’clock.

This will start alignment of the hour hand,
minute hand, second hand, and 24-hour
hand.

●

After auto alignment is complete, the
hands should be in the positions shown
below.

30

Crown

Second hand

Minute hand

Hour hand

24-hour hand

3.

Press (C).

Confirm that the small hour hand and
small minute hand are stopped at 12
o’clock.

30

Small minute hand

Small hour hand

Operation Guide 5531

18

Содержание QW 5531



























Отзывы:

Нет отзывов