Casio QW 5513, Руководство по эксплуатации

Страница: 8 / 19

Configuring Timer Settings
1.
Y
On the Home Screen, tap the “G-
SHOCK Connected” icon.
2.
X
Hold down the (C) button for about 2
seconds.
●
The second hand will move to “R”. Keep
(C) depressed until the second hand
starts moving again and then stops at
“R”.
●
The second hand will move from “R” to
“C” when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to configure the timer time
setting.
Setting the Alarm
1.
Y
On the Home Screen, tap the “G-
SHOCK Connected” icon.
2.
X
Hold down the (C) button for about 2
seconds.
●
The second hand will move to “R”. Keep
(C) depressed until the second hand
starts moving again and then stops at
“R”.
●
The second hand will move from “R” to
“C” when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to configure alarm time
settings.
Adjusting Hand and Day
Indicator Alignment
If the hands and/or date indicator are out of
alignment even though auto time adjustment
is being performed, use G-SHOCK
Connected to adjust them.
1.
Y
On the Home Screen, tap the “G-
SHOCK Connected” icon.
2.
X
Hold down the (C) button for about 2
seconds.
●
The second hand will move to “R”. Keep
(C) depressed until the second hand
starts moving again and then stops at
“R”.
●
The second hand will move from “R” to
“C” when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to correct hand and date
indicator alignment.
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in the
manner mode.
Important!
●
Do not use this function in areas
where phone call tones are
restricted.
●
The tone sounds at a high volume.
Do not use this function when
listening to phone output over
earphones.
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
30 30
After disconnection Connected
2.
X
Hold down the (A) button for about 2
seconds.
This will cause the watch to enter the
Calendar Mode.
3.
X
Hold down the (D) button for about 1.5
seconds until the second hand points to
“R”.
The second hand will move to “C” when a
connection is established between the
watch and phone, and then the phone’s
ringtone will sound.
●
It will take a few seconds before the
phone tone sounds.
4.
X
Press any button to stop the tone.
●
You can press any watch button to stop
the phone tone only during the first 30
seconds after it starts to sound.
Configuring Watch Settings
You can use G-SHOCK Connected to specify
the amount of time until a Bluetooth
connection is automatically terminated, to
enable or disable the watch operation tone,
and to configure other settings.
1.
Y
On the Home Screen, tap the “G-
SHOCK Connected” icon.
2.
X
Hold down the (C) button for about 2
seconds.
●
The second hand will move to “R”. Keep
(C) depressed until the second hand
starts moving again and then stops at
“R”.
●
The second hand will move from “R” to
“C” when a connection is established
between the watch and phone.
3.
Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Operation Guide 5513
8