background image

2220-1

Module No. 2220

GETTING ACQUAINTED

Congratulations upon your selection of the CASIO Wrist Camera (this watch).
To get the most out of your purchase, be sure to read this manual carefully
and keep the manual and everything contained in the packages.

About This Manual

Button operations are indicated using the
letters shown in the illustration.

The sizes and positions of the characters
shown on the sample displays in this
manual may differ slightly from those that
actually appear on the display of your
watch.

Each section of this manual provides you
with the information you need to perform
operations in each mode.

When performing operations with this
watch, you must first enter the correct mode
(Camera Mode, Timekeeping Mode, etc.)
See “GENERAL GUIDE” for information
about maneuvering between modes.

VISUAL DATABANK is a trademark of CASIO COMPUTER CO., LTD.

CASIO COMPUTER CO., LTD. assumes no responsibility for any loss,
or any claims by third parties that may arise through the use of this
watch.

 FRI 

3‰

 P

1‰:58

   35

12-hour/24-hour Timekeeping

Pressing 

D

 while the day is flashing on the setting screen causes the

indicator for the current timekeeping format (12H or 24H) to flash on the
display. Each press of 

E

 at this time toggles between 12-hour (12H) and

24-hour (24H) timekeeping.

The timekeeping format you select is applied in all modes.

With the 12-hour format, the 

P

 (PM) indicator appears to the left of the hour

digits for times in the range of noon to 11:59 p.m. The 

A

 (AM) indicator

appears to the left of the hour digits for times in the range of midnight to
11:59 a.m.

With the 24-hour format, times are indicated in the range of 0:00 to 23:59,
without any indicator.

Contrast Adjustment

Pressing of 

D

 while the timekeeping format indicator (12H or 24H) is flashing

causes the current contrast setting (example: CNT3 = Level 3) to appear on
the display, with the level value flashing. Use 

B

 (darker) and 

E

 (lighter) to

adjust the contrast to any one of the seven available levels.

Note

The contrast setting described above does not affect the display of images.
Image contrast can be adjusted using a separate procedure (See “To
adjust image contrast”).

Auto Display Off

The watch automatically turns off its display
screen if it is not moved for about 60 minutes.
This not only conserves battery power, it also
protects against “burn in” of display images.

To turn the display back on, press 

F

.

This displays the Timekeeping Mode screen.

BEFORE USING THE WATCH...

Warning!

Make sure you are in a safe place before operating the watch.

Do not try to record images, perform complex watch operations, or look at the
display of the watch while operating an automobile, motorcycle, or any other
vehicle. Doing so creates the risk of causing a serious traffic accident. When
you use the watch while walking, always keep aware of other people,
vehicular traffic, and surface conditions around you in order to prevent
accidents.

Do not use the watch inside of an aircraft.

Never use the watch inside of an aircraft or in any other area where the use
of such devices is prohibited. Doing so creates the risk of accident.

Always back up important data.

Rough handling of or damage to the watch can accidentally delete image
data in watch memory. Because of this, you should always keep back up
copies of your images on computer disk.

To set the time and date

1. In the Timekeeping Mode, hold down 

A

for about one second until the seconds
digits start to flash on the display. This
indicates the setting screen.

Each press of 

D

 moves the flashing around

the setting screen in the sequence shown
below.

Seconds

Hour

Minutes

Year

Month

12/24-hour Selection

Contrast Setting

Day

2. While a setting is flashing, use 

E

 (+) and 

B

 (–) to change it.

3. When everything is the way you want it, press 

A

 to exit the setting

screen.

The watch’s built-in full automatic calendar makes allowances for different
month lengths and leap years.

The watch automatically exits the setting screen if you do not perform any
operation for about two minutes.

The year can be set in the range of 2000 to 2039.

 FRI 

3‰

 P

1‰:58

   35

 FRI 

3‰

 P

1‰:58

   35

Содержание QW-1840









Отзывы: