Casio QV-770, Руководство по обслуживанию

Страница: 14 / 46

— 12 —
2. Special test program (including QV-770 Built in ROM)
(1) Turn power on at REC mode, then press “Mode” button twice and change to “Serial Recording mode”
then turn power OFF.
(2) Turn power on while pressing “DISP“ button and “SHUTTER” button.
(3) “WELCOME!” appears on the display followed by TEST MODE display.
(4) Press “MODE” button twice, then press “MENU” button and “Tran-P” button simultaneously to display
the special program menu.
(5) Press “–” button and “+” to select. Press “SHUTTER” button to execute the test.
Note: • Refer to “1-3. Strobe adjust”.
• Refer to “1-2. Defect correct”.
TEST MODE
98030401
ADJ01.60
PTPXX.XX
STROBE ADJUST
DEFECT CORRECT
BATTERY CHECK
KEY CHECK
LAST MEMORY SET
ROM version
ADJ version
patch soft version
Battery check
• Used when measuring battery life.
(1) After selecting Battery check set intervals for taking pictures. (Maximum 30 seconds)
(2) Press shutter button to enter “REC” mode. In this you can select Flash, or flash off or flash AUTO.
Notes: • TOTAL SHOT numbers will not remain in memory. (When batteries go dead they are deleted).
• Timers stop while WAIT is displayed. (1 shot takes 10 seconds). Does not mean 6 shots in one
minute. Actually about 5.5 shots in one minut.
TOTAL SHOT 1
Number of pictures taken.