Casio Oceanus OCW-G2000C-1A, Руководство по эксплуатации, Страница: 14 / 21

Changing the World Time
Setting in 15-minute Steps
If the city you want is not available on the
watch, you can use the procedure below to
configure World Time settings.
1.
Pull out the crown to the first click.
The second hand will point to the time
zone of the current World Time City.
30
Crown
World Time City
Time zone
2.
Hold down (C) for about one second.
The disk will show
l
.
30
3.
Rotate the crown to change the time and
day settings.
The World Time setting change in 15-
minute increments.
30
4.
Push the crown back in.
Note
●
Changing the World Time setting
with this operation will cause World
Time city location information to be
deleted from the watch.
●
This operation cannot be performed
while UTC is selected as the World
Time City.
Swapping Your Home City
Time and World Time
Holding down (A) for about three seconds will
swap your Home City time with your World
Time.
●
The second hand will point to the time zone
of the current World Time City for a few
seconds after you swap times.
30 30
After swapping Before swapping
World Time
World Time
Home Time
Home Time
●
If a swapping operation causes a change in
the day indicator setting, the day of the week
hand will rotate repeatedly.
l
Hand and Day Indicator Movement
Note
●
This function comes in handy when
you need to move to another time
zone. For details about how to use it,
see “
Moving to Another Time Zone ”.
Stopwatch
The stopwatch measures elapsed time in units
of one second up to 23 hours, 59 minutes, 59
seconds (24 hours).
Getting ready
Enter the Stopwatch Mode.
l
Navigating Between Modes
30
Measuring Elapsed Time
30
Seconds
Hours Minutes
Hour (24-hour time)
1.
Use the operations below to measure
elapsed time.
A
A
A
A
Stop
Resume
Stop
Start
2.
Press (B) to reset the elapsed time to all
zeros.
3.
Press (C) to return to the Timekeeping
Mode.
Operation Guide 5501
14