Casio Oceanus OCW-G1000 Скачать руководство пользователя страница 8

1.

Pull out the crown to the second click.

The second hand will move to the
currently selected time zone.

30

Crown

Time zone

2.

Rotate the crown to change the time zone.

You can also select a time zone whose
name is not indicated on the face of the
watch.

For information about time zones, see
the “

City (Time Zone) List

”.

3.

Hold down (A) for about one second to
change the summer time setting.

Each press of (A) cycles through
available settings in the sequence
shown below.
“AT (AUTO)”

 

n

 

“STD”

 

n

 

“DST”

30

“AT (AUTO)”
The watch switches between standard
time and summer time automatically.

“STD”
The watch always indicates standard
time.

“DST”
The watch always indicates summer
time.

4.

Push the crown back in to its normal
position.

Summer Time

Summer time, which is also known as Daylight
Saving Time (DST), advances the time setting
one hour, 30 minutes, or some other amount
of time from standard time (STD) during the
summer months. Whether or not and how
summer time is used depends on your country
or local area. Summer time is not used in some
countries and local areas.

Adjusting the Time and Day

Setting

1.

Pull out the crown to the second click.

The second hand will move to the

currently selected time zone.

30

Time zone

Crown

Minutes

Hours

2.

Hold down (C) for about 10 seconds.

This causes the second hand to move to

12 o’clock and enables the hour and

minute setting operation.

3.

Rotate the crown to adjust the hour and

minute settings.

4.

Press (C).

This enables the year 10’s digit setting

operation.

80

90

30

40

20

50

70

10

60

00

Year (10’s digit)

5.

Rotate the crown to move the second

hand to the desired setting for the year

ten’s digit.

6.

Press (C).

This enables the year one’s digit setting

operation.

8

9

3

4

2

5

7

1

6

0

Year (1’s digit)

7.

Rotate the crown to move the second

hand to the desired setting for the year

one’s digit.

8.

Press (C).

This changes to the month setting

operation.

8

9

10

4

2

5

7

11

1

6

12

3

Month

9.

Rotate the crown to change the month.

10.

Press (C).

This changes to the day setting operation.

30

Day

11.

Rotate the crown to change the day.

12.

On a time signal at the top of a minute,

push the crown back in.

Operation Guide 5412

8

Содержание Oceanus OCW-G1000













Отзывы: