Casio ML-3, Руководство по обслуживанию

Страница: 7 / 15

— 5 —
Nature of Trouble Faulty Block Checkpoint
No power Power Supply Circuit Base of T1 should r6 V.
Emitter of T1 should p5.6 V.
Power switch Switch contact.
Power Jack (J1) Jack contact.
No sound at all Power Amp.
(IC1: AN8053N) Pin 16 should r7.5 V when the
power switch is turned on.
Voltage at pin 14 should drop at 0 V
when the power switch is turned on.
Check output signal of pin 1.
CPU (LSI1: MSM6521-13) Voltage at pin 27 should rise 0 V to 5.6
V when the power switch is turned on.
Pins 39 ~ 46 should provide pulses.
Pin 29 should have a sound signal when
a key is pressed.
Oscillator (XL1) Pins 20 and 21 of the CPU should
receive an ocsillation signal.
Keyboard LEDs don't
light up Keyboard LED
Keyboard LED Matrix Open circuit on LX or LY line.
A certain key or switch
does not function Key and Switch Matrix Dust on the contact.
Certain keys or switches
do not function Key and Switch Matrix Open circuit on KC or KI line.
R3 R4
R5
R1
D2
ON
OFF
Power Switch
DC +7.5 V
Input
GND
DG GND AG
T1
2SD1858Q,R
D3
MTZJ6.8A
C3
R2
R6
C5 C4
D5
VDD +5.6V
AVDD +5.6V
Power Supply Circuit
The power supply circuit regulates a constant output v5.6V by T1 and D4.
TROUBLESHOOTING