Casio KL-100E, Руководство пользователя

Страница: 15 / 25

E-14
To print a stamp tape
1. Input the text you want to print.
2. Press
FUNCTION and then 5
(STAMP).
•
A mark appears next to the STAMP indicator on the display when mirror print-
ing is turned on.
•
If the text you input in step 1 is too long to fit within the maximum length you
specified, an error message (page 21) appears when you press
SET .
3. Press SET to print the stamp tape or ESC to abort the print operation and
return to the text input display in step 1.
•
After the printing is complete, the Label Printer returns to the input display in
step 1.
4. Cut off the tape and affix it to the optional stamp holder.
•
See the instructions that come with the optional stamp holder for information
about how to attach the stamp tape.
Mirror Image Printing
When you specify mirror image for text, it is printed in reverse image. Use mir-
ror image when you plan to print on transparent tape, with the printing on the
inside. When viewed through the transparent tape, the text will appear normal.
You can also use mirror image printing when using iron-on transfer tape to print
iron-on transfers.
Normal
Mirror Image
To turn mirror image printing on and off
1. Press FUNCTION and then 6 (MIRROR).
Printing a Tape
Printing a tape is as easy as pressing the PRINT key.
To print a tape
1. Press the PRINT key to print a tape of the text you have input and laid out.
•
To stop a print operation that is in progress, press ESC .
2. After the print operation is complete, press down on the tape cutter button to
cut the tape.
3. Use scissors to trim the tape to the size you want, if necessary.
•
After you print a tape, you can peel off its paper
backing and stick the tape onto the object you
want. Note that the tape will not stick on coarse,
wet, oily, or soiled surfaces. Also, you should not
try to use the tape where it is exposed to direct
sunlight or rain. Do not stick the tape onto hu-
man skin.
•
An easy way to remove the backing from a tape
and expose the adhesive surface is to bend the
tape near one of its ends. This should cause the
tape and its backing to separate, allowing you to
pull them apart.
Stamp Printing
The stamp printing feature lets you print on special stamp tape. You can then
attach the finished stamp tape to an optionally available stamp holder to create
your own original pre-inked stamps. The following is the type of stamp holder
currently available for use with stamp tapes.
Note the following important points about stamp printing.
•
Stamp printing prints text in mirror image.
•
Stamp printing is impossible while 6mm is specified as the tape width.
•
An error message (ERR!) appears on the display and the Label Printer refuses
to print whenever you try to print text that is longer than the maximum length
you specify.
J OFF
Type
ST-15
Example
8.9cm
5.5cm
Maximum Stamp Size
5.5cm
Tape
Backing
PRN?
STAMP
MIRROR