8
Quick Start Basics
.
To turn on power
Hold down the [
p
] button until the operation lamp lights.
The operation lamp will light in a color that indicates the current battery level, and
then change to flashing green.
Turning on the camera will cause it to connect with the remote controller, and the
operation lamp will slowly flash green.
.
To turn off power
Hold down the [
p
] button until the operation lamp goes off.
NOTE
• Turning off the camera will cause the remote controller to turn off automatically.
• Turning off the remote controller does not turn off the camera.
The current remote controller battery level can be determined by observing the
operation lamp color immediately after you turn on the remote controller. If the
operation lamp lights red, replace the battery.
Turning Power On or Off
Checking the Remote Controller Battery Level
Green
Amber
Red
High
Low
