Casio G-SHOCK GW-1501B Скачать руководство пользователя страница 7

Страница: 7 / 15

— 5 —

ATH

CAI

JRS
JED

THR
DXB

KBL

KHI

DEL

DAC

RGN

BKK

HKG

SEL
TYO
ADL

SYD

NOU
WLG

To turn Power Saving on and off

1. In the Timekeeping Mode, hold down

until the city

code starts to flash, which indicates the setting screen.

2. Press

nine times until the Power Saving on/off

screen appears.

3. Press

to toggle Power Saving on (

) and off

(

4. Press

to exit the setting screen.

•

The Power Saving on indicator is on the display in all

modes while Power Saving is turned on.

Auto Return Features

•

The watch automatically returns to the Timekeeping Mode if you do not perform any

button operation for two or three minutes while the Battery Level Screen is
displayed, or while in the Alarm, or Hand Setting Mode.

•

If you leave a screen with flashing digits on the display for two or three minutes

without performing any operation, the watch automatically exits the setting screen.

l l l l l l lll

lll

Power saving
on indicator

Scrolling

The

and

buttons are used in various modes and setting screens to scroll

through data on the display. In most cases, holding down these buttons during a scroll
operation scrolls through the data at high speed.

Initial Screens

When you enter the Timekeeping, World Time, or Alarm Mode, the data you were
viewing when you last exited the mode appears first.

Timekeeping

•

Resetting the seconds to

while the current count is in the range of 30 to 59

causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to

without changing the minutes.

•

The year can be set in the range of 2000 to 2099. The day of the week is calculated

automatically in accordance with the date.

•

The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch’s battery replaced or when battery power drops to
Level 4.

•

The current time for all city codes in the Timekeeping Mode and World Time Mode is

calculated in accordance with the Greenwich Mean Time (GMT) differential for each
city, based on your Home City time setting.

•

GMT differential is calculated by this watch based on Universal Time Coordinated

(UTC

) data.

UTC is the world-wide scientific standard of timekeeping. It is based upon carefully

maintained atomic (cesium) clocks that keep time accurately to within microseconds.
Leap seconds are added or subtracted as necessary to keep UTC in sync with the
Earth’s rotation. The reference point for UTC is Greenwich, England.

12-hour/24-hour Timekeeping Formats
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
also applied in all other modes.

•

With the 12-hour format, the P (PM) indicator appears on the display for times in the

range of noon to 11:59 p.m. and no indicator appears for times in the range of
midnight to 11:59 a.m.

•

With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

Illumination Precautions

•

The illumination provided by the light may be hard to see when viewed under direct

sunlight.

•

Illumination automatically turns off whenever an alarm sounds.

•

Frequent use of illumination shortens the battery operating time.

Auto light switch precautions

•

Wearing the watch on the inside of your wrist, movement of your arm, or vibration of

your arm can cause frequent activation of the auto light switch and illumination of the
face of the watch. To avoid running down the battery, turn off the auto light switch
whenever engaging in activities that might cause frequent illumination of the face.

•

Note that wearing the watch under your sleeve while the auto light switch is turned

on can cause frequent illumination of the face and can run down the battery.

•

Illumination may not turn on if the face of the watch is

more than 15 degrees above or below parallel. Make
sure that the back of your hand is parallel to the ground.

•

Illumination turns off after the preset illumination

duration (see “To specify the illumination duration”), even
if you keep the watch pointed towards your face.

•

Static electricity or magnetic force can interfere with

proper operation of the auto light switch. If illumination
does not turn on, try moving the watch back to the
starting position (parallel with the ground) and then tilt it
back towards your face again. If this does not work, drop
your arm all the way down so it hangs at your side, and
then bring it back up again.

•

Under certain conditions, illumination may not turn on

until about one second after you turn the face of the
watch towards you. This does not necessarily indicate
malfunction of the auto light switch.

•

You may notice a very faint clicking sound coming from

the watch when it is shaken back and forth. This sound
is caused by mechanical operation of the auto light
switch, and does not indicate a problem with the watch.

More than 15 degrees
too high

Honolulu

Anchorage

Los Angeles

Denver

Chicago

New York

Caracas

Rio De Janeiro

London

Paris

Berlin

City

GMT

Other major cities in same time zone

Code

Differential

City Code Table

–11

HNL
ANC

LAX

DEN

CHI

NYC

CCS

RIO
–02
–01

GMT

LON

PAR

BER

–11.0
–10.0
–09.0

–08.0

–07.0

–06.0

–05.0

–04.0
–03.0
–02.0
–01.0

+00.0

+01.0

Pago Pago
Papeete
Nome
San Francisco, Las Vegas, Vancouver,
Seattle/Tacoma, Dawson City
El Paso, Edmonton
Houston, Dallas/Fort Worth,
New Orleans, Mexico City, Winnipeg
Montreal, Detroit, Miami, Boston,
Panama City, Havana, Lima, Bogota
La Paz, Santiago, Port Of Spain
Sao Paulo, Buenos Aires, Brasilia, Montevideo

Praia
Dublin, Lisbon, Casablanca, Dakar, Abidjan

Milan, Rome, Madrid, Amsterdam, Algiers, Hamburg,
Frankfurt, Vienna, Stockholm

Athens

Cairo

Jerusalem

Jeddah

Tehran

Dubai
Kabul

Karachi

Delhi

Dhaka

Yangon