Casio FX-9700GH, Руководство по обслуживанию и список запасных частей

Страница: 13 / 25

– 11 –
5-3. Setting Communications Parameters
Before you can perform data communications, you must first set up cartain hardware parameters to make sure
that the two units are able to understand each other. The parameters of the sender and the receiver must be
identical for them to be able to communicate correctly. There are two hardware parameters that you can set.
Parameter Settings
EVEN
PARITY ODD
NONE
1200
2400
4800
9600
Speed (BPS)
To Set fx-9700GH Parameters
Starting from the LINK Mode:
F6
(PRM)
* The parameters that are currently set are highlighted on the display.
The pointer indicate which parameter you can change. Use and to move the highlighting and change
the parameter where the pointer is located.
Use and to move the pointer up and down.
After the parameters and highlighted the way you want, press
EXE
to store them.
• To abort the parameter setting procedure and return the settings to what they were before you changed
them, press
AC
before pressing
EXE
to store the parameters.
5-4. Using ALL, Range, and Factor
The following procedures show how to send data using ALL, Range, and Factor from one fx-9700GH unit
to another. The example procedure shows an operation using ALL only, but the procedures for Range
and Factor are identical.
PARAMETERS
PARITY
EVEN ODD NONE
BPS
1200 2400 4800 9600
TO SELECT : [ ] [ ]
[ ] [ ]
TO SET : [ EXE ]
EVEN
9600
Pointer
PARAMETERS
PARITY
EVEN ODD NONE
BPS
1200 2400 4800 9600
TO SELECT : [ ] [ ]
[ ] [ ]
TO SET : [ EXE ]
NONE
9600
COMMUNICATION
PARITY : NONE
BPS : 9600
EXE