164
EDITING IMAGES
Use the procedure in this section to change the date and time of
a previously recorded image. This capability comes in handy
when the current date and time are wrong due to the following
reasons.
•
Because the camera’s clock settings were not configured
correctly when the image was recorded (page 12)
•
Because the image was recorded using the wrong World
Time zone (page 194)
1.
In the PLAY mode, use [
W
] and [
X
] to display
the image whose date and time you want to
edit.
2.
Press [MENU].
3.
On the “PLAY” tab, select “Date/Time” and
then press [
X
].
4.
Set the date and the time you want.
5.
When all the settings are the way you want,
press [SET] to apply them.
•
After editing the time and date, display the image to
confirm that the date and time are correct.
Editing the Date and Time of an Image
To do this:
Do this:
Change the value at the cursor
location
Press [
S
] or [
T
].
Move the cursor between settings
Press [
W
] or [
X
].
Toggle between 12-hour and 24-
hour timekeeping
Press [BS].
