51
OTHER RECORDING FUNCTIONS
Assigning Functions to the Controller
A
“
key customization
”
feature lets you assign a setting func-
tion to the controller. After you assign a function, the corre-
sponding parameter is changed whenever you rock the con-
troller left or right in the REC mode.
1.
In the REC mode, press MENU.
2.
Select the
“
REC
”
tab, select
“
L/R Key
”
, and
then rock the controller to the right.
NOTE
•
The initial default setting is
“
REC Mode
”
.
When you want to assign this
function to the controller :
Recording mode
•
Rock left or right to cycle through
modes.
•
EX-S1: Snapshot, Nignt Scene,
Movie
•
EX-M1: Snapshot, Nignt Scene,
Movie, Snapshot Audio, Voice
Recording (page 104)
Exposure compensation
•
Rock left to decrease, rock right to
increase (page 42)
Flash mode
•
Rock left or right to cycle through
modes (page 37).
White balance mode
•
Rock left or right to cycle through
modes (page 43).
Select this:
REC Mode
EV Shift
Flash
White Balance
IMPORTANT!
•
The monitor screen turns back on automatically in the
following cases, even if
“
LCD-OFF
”
is selected with
the above procedure.
—
When you press MENU (Monitor screen remains
on for about one minute.)
—
When you rock the controller left or right
—
When you enter the Movie Mode or Voice Record-
ing Mode for recording
—
When you use the Snapshot Audio Mode to add
audio to a snapshot
3.
Rock the controller up or down to select the
setting you want, and then click.
