107
Other Playback Functions (PLAY)
Procedure
PLAY mode
*
Snapshot Screen
*
[MENU]
*
PLAY Tab
*
Dubbing
2.
Press [SET] again to stop audio recording.
• Take care that you do not block the camera’s microphone
with your fingers while recording.
• Good recording results are not possible when the camera is
too far away from what you are trying to record.
• Your camera supports the following audio data formats.
– Audio Format: WAVE/IMA-ADPCM (WAV extension)
• Adding audio (dubbing) is not possible for the following
types of images.
– Images created using MOTION PRINT
– Protected images
• To delete audio, perform the following operation:
Dubbing
*
Delete
*
[SET]
*
[MENU].
IMPORTANT!
• Note that you cannot restore the original audio of an Audio Snapshot after you
delete or re-record it.
1.
In the PLAY mode, use [
4
] and [
6
] to scroll through the images until
the Audio Snapshot you want is displayed.
An audio snapshot is one that has a
ˆ
icon.
2.
Press [SET] to start playback.
Adding Audio to a Snapshot (Dubbing)
You can add audio to a snapshot after you shoot
it. You can re-record a snapshot’s audio
whenever you want. You can record up to about
30 seconds of audio for a single snapshot.
1.
Press [SET] to start audio recording.
Remaining recording time
To play snapshot audio
Microphone