Casio EX-292, Руководство по обслуживанию

Страница: 41 / 74

— 39 —
6. ERROR CODE LIST
This section describes what to do when you have problems with operation.
Errors are indicated by an error codes. When this happens, you can usually find out what the problem is
as illustrated below.
Press
C
and check the appropriate section of this manual for the operation you want to perform.
When an error occurs
Error
code
Message Meaning Action
E001 Wrong mode Mode switch position changed before
finalization.
Return the mode switch to its original
setting and finalize the operation.
E003 Wrong operator The signed on clerk differs from the
clerk performed the tracking check
registration.
Input correct check number or assign
the proper clerk number.
E004 Error INIT/FC Initialization or unit lock clear
operation in progress.
Complete operation.
E008 Please sign on Registration without entering a clerk
number.
Enter a clerk number.
E010 Close the drawer The drawer is left open longer than the
program time (drawer open alarm).
Close the drawer.
E011 Close the drawer Attempt to register while the cash
drawer is open.
Shut the cash drawer.
E016 Change back to REG
mode
Two consecutive transactions
attempted in the refund mode.
Switch to another mode and then
back to the RF mode for the next
transaction.
E017 Enter CHK/TBL
number
Attempt made to register an item
without inputting a check number.
Input a check number.
E018 Enter Table number Attempt made to register an item
without inputting a table number.
Input a table number.
E019 Enter number of
customers
Finalize operation attempted without
entering the number of customer.
Enter the number of customer.
E021 No DEPT Link No department linked PLU is
registered.
Correct the program.
E026 Enter condiment/
preparation PLU
No condiment/preparation PLU is
registered.
Register condiment/preparation PLU.
E029 In the tender opera-
tion
Item registration is prohibited, while
partial tender.
Finalize the transaction.
E031 Press ST key Finalization of a transaction attempted
without confirming the subtotal.
Press <SUBTOTAL>.
E033 Enter tendered amount Finalize operation attempted without
entering amount tender.
Enter the amount tendered.
E035 Change amount
exceeds limit
Change amount exceeds preset limit. Input amount tendered again.
E036 Remove money from
the drawer
Contents of the drawer exceed
programmed limit.
Perform paidout operation.
E037 Digit or amount
limitation over
High amount lock out/low digit lock out
error
Enter correct amount.
E038 Perform money
declaration
Read/reset operation without declaring
cash in drawer.
This error appears only when this
function is activated.
Perform money declaration.