31
Photography
Shoots still images for clinical use. Suitable for normal still image photography.
1.
Set the photography mode to “
NORMAL”.
2.
Point the camera at the subject and press the shutter button down
halfway to focus the image.
3.
With the camera fixed in place, press the shutter button down fully.
• A still image is photographed.
• You can also take photos by tapping
.
A single shutter release shoots 3 types of still image with the same angle of view.
• 3 types of image shot simultaneously
NOTE
• To shoot UV images, the UV setting must be enabled (ON). For information on UV
settings, refer to ”UV ON/OFF setting” (page 63) in “Other Settings” (page 61).
1.
Set the photography mode to “
DERMO CONT”.
2.
Place the camera lens directly on the affected area and press the
shutter button down halfway to focus the image.
3.
With the camera fixed in place, press the shutter button down fully.
• 3 types of still image are photographed.
• You can also take photos by tapping
.
Photography in NORMAL mode (NORMAL)
Photography in DERMO CONT mode (DERMO CONT)
Polarized image
Image where diffused light reflected from the photographed
surface is blocked
Non-polarized
image
Normal photographed image
UV image
Image shot using UV light (405 nm)
OFF
OFF
Non-polarized
image
UV image
Polarized image
