Casio DT-9721CHGE, Руководство пользователя

Страница: 7 / 10

E-6
The Battery Charger can be used to charge the battery pack (DT-9723LIC).
1
.
Connect the power cable to the Battery
Charger, and then plug the cable into an
electrical outlet.
2
.
Attach the battery pack by sliding in the
direction indicated by the arrow. The
CHARGE indicator lamp (orange) lights
after a few seconds and charging begins.
Charging is completed when the CHARGE
indicator lamp goes out.
•
Charging on completely discharged
battery pack takes about 3 hours.
• Time period of charging may vary
depending on the ambient temperature and condition of the battery pack.
• The CHARGE lamp flashes when battery pack already fully charged is attached
on the charger.
Important!
• Securely attach the battery pack to the Battery Charger.
• Charge the battery pack in a location that is free of vibrations.
• If the CHARGE lamp does not light at all or does flash when battery pack is
attached, it indicates the possibility of a malfunction either in the Battery Charger
or the battery pack. Please contact the store where you purchased the product or
an authorized CASIO service provider.
• Use only the power cord accompanied to the Battery Charger.
• For compliance in the USA and Canada, use only CSA/UL certified power cord
set, Polarized, Type SPT-2 or heavier, minimum No. 18 AWG copper, rated 125
or 250V, minimum 1A, minimum 6 ft (1.8m).
The power cord accompanied to the Battery Charger is compliant with this
requirement.
• With the Battery Charger, charge only the lithium-ion battery DT-9723LIC. It is
not recommended to use for other types of lithium-ion battery which may cause
burst.
Using the Battery Charger (DT-9721CHGE)
DT9721CHGE_E_P06_08.p65 09.11.12, 5:17 PM 6