7
2.4 Installation of Satellite I/O Box (1 unit)
Environment Setup
1) Make sure that the POWER switch of the I/O Box is set to OFF.
2) Set the DIP switches provided on the rear panel to the following.
Table 2.1
1
2
3
4
5
6
7
8
9
10
ON
OFF
OFF
OFF
ON
OFF
ON
ON
ON
ON
Note:
The above settings assume that the communication speed is set to 115,200 bps.
To set a different baud rate modify the SW6, SW7, and SW8 settings as follows:
Table 2.2
Baud Rate
SW6
SW7
SW8
9,600 bps
OFF
ON
OFF
19,200 bps
ON
ON
OFF
38,400 bps
OFF
OFF
ON
57,600 bps
ON
OFF
ON
115,200 bps
OFF
ON
ON
Connection
1) Connect the AC adaptor to the I/O Box.
2) Connect the I/O Box to the PC with the RS-232C cross-type cable.
Start-up
1) Set the POWER switch to ON.
2) Make sure that the “READY POWER” lamp lights in green.
