Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (B) until the second hand
points to [C] twice.
This establishes a connection between
the watch and phone.
●
The second hand will point to [C] once
after about 0.5 seconds, and then a
second time after about 2.5 seconds.
3.
Y
Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.
Unpairing
Unpairing the watch from a phone requires
both CASIO WATCHES and watch
operations.
●
Deleting Pairing Information from
CASIO WATCHES
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
30
30
Connected
Disconnected
2.
Y
Tap the “CASIO WATCHES” icon.
3.
Y
Perform the operation shown on the
phone screen to unpair.
●
Deleting Pairing Information from the
Watch
1.
X
Pull out the crown to the first click.
2.
X
Hold down (B) for at least 10 seconds.
This deletes the pairing information. The
second hand will point to [C].
3.
X
Push the crown back in.
If you purchase another phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
Deleting Pairing Information from the
Watch
l
Time Adjustment
Your watch can obtain date and time
information by connecting with a phone and by
receiving time signals, which it uses to adjust
its settings.
Important!
●
Disable auto time adjustment
whenever you are inside an aircraft or
in any other area where radio wave
reception is prohibited or restricted.
l
Using the Watch in a Medical
Facility or Aircraft
Watch Operation Guide 5665
15