Casio 5659, Руководство по эксплуатации, Страница: 14 / 28

Connection
Connecting with a Phone
Your watch can connect with a phone that is
paired with it.
●
If the watch is not paired with the phone you
want to connect with, refer to the information
below and pair them.
l C Pair the watch with a phone.
●
Connecting with a Phone
1.
Move the phone close to (within one meter
of) the watch.
2.
X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] and
e start to flash.
When a connection is established
between the watch and phone, [CNCT]
and
e will stop flashing and remain on the
display.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Connected Trying to connect
Important!
●
If you have problems establishing a
connection, it could mean that BABY-
G Connected is not running on your
phone. On your phone’s home screen,
tap the “BABY-G Connected” icon.
After the app starts up, hold down the
watch’s (C) button for at least three
seconds.
Note
●
The connection will be terminated if
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with
BABY-G Connected: “Watch settings”
n
“Connection time”. Next, select a
setting of 3 minutes, 5 minutes, or 10
minutes.
Disconnecting from Your Phone
Pressing any button will terminate a Bluetooth
connection and return to the Timekeeping
Mode.
Disconnected Connected
Unpairing
Unpairing the watch from a phone requires
both BABY-G Connected and watch
operations.
●
Deleting Pairing Information from
BABY-G Connected
1.
Y Tap the “BABY-G Connected” icon.
2.
Y Perform the operation shown on the
phone screen to unpair.
●
Deleting Pairing Information from the
Watch
1.
X
Hold down (C) for at least one second
to enter the Timekeeping Mode.
2.
X
Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
●
This is the setting mode. The hands
automatically shift out of the way for
easy viewing of the display and other
indicators.
Home City
3.
X Press (C) twice.
This causes the seconds to flash.
Seconds
4.
X Hold down (B) for at least three
seconds. This will cause the [PAIR] and
[CLR] indicators to alternate on the
display. Release the button when only
[CLR] is displayed.
This deletes the pairing information from
the watch and returns to the timekeeping
display.
5.
X Press (A) to return to the Timekeeping
Mode.
If you purchase another phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
Deleting Pairing Information from the
Watch
l
C
Pair the watch with a phone.
Watch Operation Guide 5659
14