Configuring Reminder
Settings
After you use BABY-G Connected to create
reminders, appointments, anniversaries, or
other events you need to remember, you can
check them on the watch.
●
You can have up to five reminders
registered.
1.
Y
Tap the “BABY-G Connected” icon.
2.
X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] and
e
start to flash.
When a connection is established
between the watch and phone, [CNCT]
and
e
will stop flashing and remain on the
display.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Connected
Trying to connect
3.
Y
Follow the instructions that appear on
the screen to configure reminder settings.
●
You can input up to 18 alphanumeric
characters as a reminder title.
Note
●
To prevent the appointments from
being displayed on the watch, use
BABY-G Connected to turn off the
reminder setting.
Configuring World Time
Settings
Specifying a World Time City with BABY-G
Connected causes the watch’s World Time
City to change accordingly. Settings can be
configured to perform auto summer time
switching for the World Time City.
Note
●
BABY-G Connected World Time lets
you select from among approximately
300 cities as the World Time City.
●
You can use BABY-G Connected to
configure settings for user cities that
are not included in the watch’s built-in
World Time Cities. You must use
BABY-G Connected to select a user
city as your World Time City.
●
Selecting a World Time City
1.
Y
Tap the “BABY-G Connected” icon.
2.
X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] and
e
start to flash.
When a connection is established
between the watch and phone, [CNCT]
and
e
will stop flashing and remain on the
display.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Connected
Trying to connect
3.
Y
Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
●
Configuring the Summer Time Setting
1.
Y
Tap the “BABY-G Connected” icon.
2.
X
Hold down (C) for at least three
seconds. Release the button when
[CNCT] and
e
start to flash.
When a connection is established
between the watch and phone, [CNCT]
and
e
will stop flashing and remain on the
display.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Connected
Trying to connect
3.
Y
Perform the operation shown on the
phone screen to select a summer time
setting.
●
“Auto”
The watch switches between standard
time and summer time automatically.
●
“OFF”
The watch always indicates standard
time.
●
“ON”
The watch always indicates summer
time.
Note
●
While the summer time setting is
“Auto”, the watch will switch between
standard time and summer time
automatically. You do not need to
switch between standard time and
summer time manually. Even if you are
in an area that does not observe
summer time, you can leave the
watch’s summer time setting as “Auto”.
●
For information about summer time
periods, refer to the “Summer Time
Table” or BABY-G Connected.
Watch Operation Guide 5659
11