Casio 5636, Руководство по эксплуатации

Страница: 13 / 23

Configuring Timer Settings
●
Enter the Calendar Mode and then press
(D). Next, check to make sure that the
second hand is pointing to [Y(YES)].
●
If the second hand is not pointing to
[Y(YES)], refer to the information at the link
below.
l
Connecting with a Phone
1.
Y Tap the “G-SHOCK Connected” icon.
2.
Y Perform the operation shown on the
phone screen to configure the timer time
setting.
●
Set the hours and minutes of the timer
start time.
Adjusting Hand and Day
Indicator Alignment
If the hands and/or day indicator are out of
alignment even though auto time adjustment
is being performed, use G-SHOCK
Connected to adjust them.
●
Enter the Calendar Mode and then press
(D). Next, check to make sure that the
second hand is pointing to [Y(YES)].
●
If the second hand is not pointing to
[Y(YES)], refer to the information at the link
below.
l
Connecting with a Phone
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
Y
Perform the operation shown on the
phone screen to correct hand and day
indicator alignment.
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
●
Phone finder will not sound the tone
unless G-SHOCK Connected is
running on the phone.
●
Do not use this function in areas where
phone call tones are restricted.
●
The tone sounds at a high volume. Do
not use this function when listening to
phone output over earphones.
1.
X Hold down (C) for at least one second.
This will cause the watch to enter the
Calendar Mode.
2.
X Hold down (D) for at least five seconds
until the second hand points to [C].
A connection will be established between
the watch and phone, and then the
phone’s ringtone will sound.
●
It will take a few seconds before the
phone tone sounds.
3.
X
Press any button to stop the tone.
●
You can press any watch button to stop
the phone tone, but only during the first
30 seconds after it starts to sound.
Configuring Watch Settings
After establishing a connection between the
watch and a phone, you can use G-SHOCK
Connected to configure watch settings and to
view information acquired by the watch.
●
Enter the Calendar Mode and then press
(D). Next, check to make sure that the
second hand is pointing to [Y(YES)].
●
If the second hand is not pointing to
[Y(YES)], refer to the information at the link
below.
l
Connecting with a Phone
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Changing the Home City
Summer Time Setting
●
Enter the Calendar Mode and then press
(D). Next, check to make sure that the
second hand is pointing to [Y(YES)].
●
If the second hand is not pointing to
[Y(YES)], refer to the information at the link
below.
l
Connecting with a Phone
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
Y
Perform the operation shown on the
phone screen to change your Home City
summer time setting.
Watch Operation Guide 5636
13