Casio 5623, Руководство по эксплуатации

Страница: 2 / 26

Before Getting
Started...
This section provides an overview of the watch
and introduces convenient ways it can be
used.
Important!
●
This watch is not a special-purpose
measuring instrument. Measurement
function readings are intended for
general reference only.
●
It can be used while skin diving, scuba
diving, etc.
l
Using the Diving Function
Note
●
The illustrations included in this
operation guide have been created to
facilitate explanation. An illustration
may differ somewhat from the item it
represents.
Watch Face Items
①
②
③
④
⑤
⑥
⑦
⑩
⑧
⑨
⑪
A
Day of week
In the Calendar Mode, the mode hand
points to the day of the week in the Home
City.
B
Summer time setting
The mode hand points to the current
summer time setting.
C
[D]
In the Dive Mode, the mode hand points
to [D].
D
Tide Level
In the Tide Graph Mode, the mode hand
points to the current tide level in the
specified port.
E
[ST]
In the Stopwatch Mode, the mode hand
points to [ST].
F
[TR]
In the Timer Mode, the mode hand points
to [TR].
G
[AL]
In the Alarm Mode, the mode hand points
to [AL].
H
Alarm on/off setting
In the Alarm Mode, the second hand
indicates if the alarm is enabled or
disabled.
[ON]: Alarm enabled
[OFF]: Alarm disabled
I
Last receive result, phone connection
status, Airplane Mode setting
The second hand points to the letter that
indicates the result of the last time
adjustment operation that was performed
by receipt of a time calibration signal when
the watch is not paired with a phone.
[Y(YES)]: Auto time adjustment
successful
[N(NO)]: Auto time adjustment failed
The second hand indicates the
connection status between the watch and
a phone when the watch is paired with a
phone.
[Y(YES)]: The watch is connected to your
phone.
[N(NO)]: The watch is not connected to
your phone.
The second hand indicates if auto time
adjustment (Airplane Mode) is enabled or
disabled.
[Y(YES)]: Auto time adjustment enabled
(Airplane Mode disabled)
[N(NO)]: Auto time adjustment disabled
(Airplane Model enabled)
J
[C]
When connection with the phone starts,
the second hand will point to [C].
K
[RC]
The second hand points to [RC] while time
calibration signal reception is in progress.
Navigating Between Modes
Press (C) to cycle between modes.
●
In any mode*, hold down (C) for at least one
second to enter the Calendar Mode.
●
In any mode*, hold down (C) for at least two
seconds to enter the Dive Mode.
* Besides Dive Mode.
C C
C
C
C
C
C
30
Dive Mode
(At least 2 seconds) (At least 2 seconds)
Tide Graph Mode
Timer Mode
Alarm Mode
Stopwatch Mode
Calendar Mode
Mode hand
●
Connecting with a Phone
Hold down (D) for at least 0.5 seconds until the
second hand points to [C].
D
30 30
After connection Before connection
Operation Guide 5623
2