Casio 5459, Руководство по эксплуатации, Страница: 14 / 15

Q2
I can’t connect while my phone is in
the Airplane Mode.
Connection with the watch is not possible while
the phone is in the Airplane Mode. After exiting
the phone’s Airplane Mode, go to its Home
Screen and tap the “CASIO WATCH+” icon.
Then on the watch, hold down the CONNECT
button (B) for about 1.5 seconds.
30
Q3
I changed the phone’s Bluetooth
from enabled to disabled, and now I
can’t connect anymore.
On the phone, disable and then re-enable
Bluetooth, and then go to the Home Screen
and tap the “CASIO WATCH+” icon. Next, on
the watch, hold down the CONNECT button
(B) for about 1.5 seconds.
30
Q4
I can’t connect after turning off the
phone.
Turn on the phone and tap the CASIO WATCH+
icon. Then on the watch, hold down the
CONNECT button (B) for about 1.5 seconds.
Phone-Watch Connection
Q1
I can’t establish a connection
between the phone and watch.
Have you tried turning your phone off and
then back on again?
Turn the phone off and then back on, and
then tap the CASIO WATCH+ icon. Next,
on the watch, hold down the CONNECT
button (B) for about 1.5 seconds.
Has the watch been re-paired with the
phone?
After unpairing the watch and phone, re-
pair them again.
l
If you purchase another phone
If you are unable to establish a
connection...
Delete the pairing information from the
watch, and then re-pair the watch and
phone.
l
See "Unpairing".
Changing to a Different
Phone Model
Q1
Connecting the current watch to
another phone.
Clear pairing information from the watch you
are currently using, and then pair with another
phone.
l
If you purchase another phone
Phone Finder
Q1
Phone Finder does not work.
Are the phone and watch disconnected?
Phone Finder does not work during
Bluetooth connection.
Is CASIO WATCH+ running on your
phone?
Phone Finder will not work unless CASIO
WATCH+ is running. On the Home
Screen, tap the CASIO WATCH+ icon.
Other than the above.
If the phone does not respond after a few
seconds, it could mean that the phone is
located too far from the watch. Change to
a different location and try again.
Q2
It takes some time before the phone
responds.
The phone will emit a tone when a connection
is established with the watch, which takes a
few seconds.
Q3
The phone cannot be found even
when it is close to the watch.
Since communication is performed using
radio waves, the watch may not be able to find
the phone even if it is within two meters.
Certain environments may make the
allowable communication range very short.
Operation Guide 5459/5460
14