E-8
Selecting a Mode
•
The illustration below shows which buttons you need to press to navigate between modes.
•
To return to the Timekeeping Mode from any other mode, hold down
D
for about two seconds.
World Time Mode
Stopwatch Mode
Recall Mode
Countdown Timer Mode
Alarm Mode
World Time Mode
Stopwatch Mode
Recall Mode
Countdown Timer Mode
Alarm Mode
E-9
•
The mode dial hand indicates the watch’s current mode.
Thermometer Mode
Timekeeping Mode
Digital Compass Mode
Mode dial hand
Thermometer Mode
Timekeeping Mode
Digital Compass Mode
Mode dial hand
E-10
General Functions (All Modes)
•
The functions and operations described in this section can be used in all of the modes.
Direct Timekeeping Mode Access
•
To enter the Timekeeping Mode from any other mode, hold down
D
for about two seconds.
Auto Return Features
•
The watch will automatically return to the Timekeeping Mode if you do not perform any button operation
for a particular amount of time in each mode.
Mode Name
Approximate Elapsed Time
Alarm
3 minutes
Digital Compass
1 minute
Thermometer
1 to 2 minutes
Setting screen (digital setting fl ashing)
2 to 3 minutes
Initial Screens
•
When you enter the Timekeeping, Alarm, World Time, or Digital Compass Mode, the data you were
viewing when you last exited the mode appears fi rst.
Scrolling
•
The
E
and
B
buttons are used on the setting screen to scroll through data on the digital display. In
most cases, holding down these buttons during a scroll operation scrolls through the data at high
speed.
E-11
Graphic Area
•
The graphic area along the edge of the digital display indicates the seconds count in the Timekeeping
Mode (page E-12), Stopwatch Mode (page E-34), Timer Mode (page E-38), and World Time Mode
(page E-40).
Example:
Graphic Area
E-12
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
•
Each press of
A
in the Timekeeping Mode will change digital display contents as shown below.
•
The graphic area (page E-11) shows the seconds count.
Date Screen
Day of week
Day of the Week
Month-Day
Hour : Minutes
PM indicator
Day
Second
Second
Day
Hour hand
Second hand
World time hour hand
Graphic area
Minute hand
Mode dial
hand
E-13
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting either standard time or
daylight saving time (DST).
To confi gure Home City settings
1. In the Timekeeping Mode, hold down
A
until
ADJ
appears in the
digital display.
•
When you release
A
(after
ADJ
appears), the second hand will
move to the city code of the currently selected Home City. This is
the setting mode.
•
Whenever you enter a setting mode, the hour and minute hands
will automatically move to positions that allow easier viewing of the
digital dials.
•
The watch will exit the setting mode automatically if you do not
perform any operation for about two or three minutes.
2. Use
E
(clockwise) and
B
(counterclockwise) to move the second
hand between the city codes.
•
Keep moving the second hand until it is pointed at the city code
you want to select as your Home City.
•
For details about city codes, see the “City Code Table” at the back
of this manual.
3. Press
D
.
•
This will cause the
DST
indicator and the DST setting of the
currently selected Home City to appear on the digital display.
DST indicator
TYO (TOKYO)
DST indicator
TYO (TOKYO)
E-14
4. Press
E
to toggle the DST setting between daylight saving time (
ON
) and standard time (
OFF
).
•
Note that you cannot switch between standard time and daylight saving time (DST) while UTC is
selected as your Home City.
5. After all of the settings are the way you want, press
A
to exit the setting screen.
•
The
DST
indicator appears to indicate that daylight saving time is turned on.
Note
•
After you specify a city code, the watch will use UTC* offsets in the World Time Mode to calculate
the current time for other time zones based on the current time in your Home City.
* Coordinated Universal Time, the world-wide scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
To change the daylight saving time (summer time) setting
1. In the Timekeeping Mode, hold down
A
until
ADJ
appears in the
digital display.
•
When you release
A
(after
ADJ
appears), the second hand will
move to the city code of the currently selected Home City. This is
the setting mode.
2. Press
D
.
•
This will cause the
DST
indicator and the DST setting of the
currently selected Home City to appear on the digital display.
3. Press
E
to toggle the DST setting between daylight saving time (
ON
) and standard time (
OFF
).
4. After all of the settings are the way you want, press
A
to exit the setting screen.
•
The
DST
indicator appears to indicate that daylight saving time is turned on.
E-15
Confi guring Current Time and Date Settings
You can use the procedure below to adjust the Timekeeping Mode time and date settings if they are off.
Changing the digital Home City data should cause the analog time setting to change accordingly. If the
analog time does not indicate the digital time, check the home positions of the hands and make
adjustments if necessary (page E-18).
To change the current time and date settings
1. In the Timekeeping Mode, hold down
A
until
ADJ
appears in the
digital display.
•
When you release
A
(after
ADJ
appears), the second hand will
move to the city code of the currently selected Home City. This is
the setting mode.
•
Whenever you enter a setting mode, the hour and minute hands
will automatically move to positions that allow easier viewing of the
digital dials.
TYO (TOKYO)
TYO (TOKYO)
Operation Guide 5366