Casio 5269, Руководство по эксплуатации, Страница: 2 / 9

E-10
E-70 Troubleshooting
E-75 Specifi cations
E-11
Mode Reference Guide
Your watch has 9 “modes”. The mode you should select depends on what you want to do.
To do this: Enter this mode: See:
• View the current time and date in the Home City
• Confi gure Home City and daylight saving time (DST) settings
• Confi gure current location latitude and longitude settings
• Confi gure time and date settings
Timekeeping Mode E-16
• Determine your current bearing or the direction from your current
location to a destination as a direction indicator and angle value
• Determine your current location using the watch and a map
Digital Compass
Mode
E-29
Determine the temperature at your current location Thermometer Mode E-43
View the sunrise and sunset times for a specifi c date Sunrise/Sunset Mode E-49
Determine a Moon age value Moon Age Mode E-52
Set an alarm time Alarm Mode E-54
Use the stopwatch to measure elapsed time Stopwatch Mode E-58
Use the countdown timer Countdown Timer Mode E-60
View the current time in one of 48 cities (31 time zones) around the globe World Time Mode E-63
E-12
Selecting a Mode
• The illustration below shows which buttons you need to press to navigate between
modes.
• To return to the Timekeeping Mode from any other mode, hold down
C
for about
two seconds.
• In any mode, press
L
to illuminate the display.
Alarm Mode Moon Age Mode
Stopwatch Mode Countdown Timer Mode
Alarm Mode Moon Age Mode
Stopwatch Mode Countdown Timer Mode
E-13
Timekeeping Mode
Thermometer Mode
Sunrise/Sunset Mode
World Time Mode
Digital Compass Mode Timekeeping Mode
Thermometer Mode
Sunrise/Sunset Mode
World Time Mode
Digital Compass Mode
E-14
General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.
Auto Return Features
• If you do not perform any operation for a certain amount of time in certain modes as
shown in the table below, the watch will automatically return to the Timekeeping
Mode.
Mode No operation time
Digital Compass, Thermometer 1 to 2 minutes
Sunrise/Sunset, Moon Age, Alarm 2 to 3 minutes
• If you leave a setting screen (one with fl ashing digits) on the digital display for two
or three minutes without performing any operation, the watch exits the setting
screen automatically.
E-15
Initial Screens
When you enter the Sunrise/Sunset Mode, Digital Compass Mode, Alarm Mode, or
World Time Mode, the data you were viewing when you last exited the mode will
appear fi rst.
Scrolling
The
B
and
D
buttons are used on the setting screen to scroll through available
settings on the digital display. In most cases, holding down these buttons during a
scroll operation scrolls through the data at high speed.
E-16
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
• Each press of
A
in the Timekeeping Mode toggles the digital display between the
current date and the current time.
• You can select one of the two following Date Screen display formats: SUN 6.30 or
SUN 30.6. For information about how to select the format, see “Date Display
Format” under “To change the current time and date settings” (page E-22).
Day of week
Month Day
Hour : Minutes
Seconds
Date screen Regular timekeeping screen
E-17
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
1. In the Timekeeping Mode, hold down
A
for at least two
seconds until ADJUST appears on the digital display.
This is the setting mode. Release
A
after ADJUST
appears.
• The city name of the currently selected Home City
data will appear on the digital display with an arrow
( ) fl ashing to the left.
• The watch will exit the setting mode automatically if
you do not perform any operation for about two or
three minutes.
• For details about city data, see the “City Data Table”
at the back of this manual.
City Name City Name
E-18
2. Press
D
(East) and
B
(West) to scroll through city names until the one you want
to use as your Home City data is displayed.
3. Press
C
to display the DST setting screen.
4. Press
D
to toggle between Daylight Saving Time ( DST ON ) and Standard Time
( DST OFF ).
5. When the setting is the way you want, press
A
twice to
return to the Timekeeping Mode.
• The DST indicator appears to indicate that Daylight
Saving Time is turned on.
Note
• After you specify city data, the watch will use UTC*
offsets to calculate the current time for other time
zones based on the current time in your Home City.
* Coordinated Universal Time, the world-wide
scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
Setting
DST indicator
Setting
DST indicator
E-19
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down
A
for at least two
seconds until ADJUST appears on the digital display.
Release
A
after ADJUST appears.
• The name of the city currently selected as your
Home City will appear on the digital display with an
arrow ( ) fl ashing to the left.
2. Press
C
to display the DST setting screen.
3. Press
D
to toggle between Daylight Saving Time
( DST ON ) and Standard Time ( DST OFF ).
4. When the setting is the way you want, press
A
twice to
return to the Timekeeping Mode.
• The DST indicator appears to indicate that Daylight
Saving Time is turned on.
Setting
DST indicator
Setting
DST indicator
Operation Guide 5269