Casio 5235 Скачать руководство пользователя страница 5

Operation Guide 5235/5414 (OC)

E-34

 Specifi cations

Accuracy at normal temperature:

  ±15 seconds a month (with no signal calibration)

Timekeeping (World time):

  Hour, minutes (hand moves every 10 seconds), seconds, day

Calendar system:  Full Auto-calendar pre-programmed from the year 2000 to 2099
Other:  Home City code (can be assigned one of 29 city codes and Coordinated Universal Time); 

Daylight Saving Time (summer time) / Standard Time

Time Calibration  Signal Reception:

 Auto receive up to six times a day (5 times a day for the Chinese 

calibration signal; Remaining auto receives cancelled as soon as one is successful); 
Manual receive

Receivable  Time Calibration Signals: 

Mainfl ingen, Germany (Call Sign: DCF77, Frequency: 77.5 kHz); Anthorn, England 
(Call Sign: MSF, Frequency: 60.0 kHz); Fukushima, Japan (Call Sign: JJY, Frequency: 
40.0 kHz); Fukuoka/Saga, Japan (Call Sign: JJY, Frequency: 60.0 kHz); Fort Collins, 
Colorado, the United States (Call Sign: WWVB, Frequency: 60.0 kHz); Shangqiu City, 
Henan Province, China (Call Sign: BPC, Frequency: 68.5 kHz)

Other:

  Power Saving; Low battery alert; Auto Correction of Hand Home Positions

 Power Supply:

  Solar panel and one rechargeable battery

Approximate battery operating time: 7 months (from full charge to Level 3)
under the following conditions:

 

x

 Hands operational 18 hours per day, sleep state 6 hours per day

 

x

 4 minutes of signal reception per day

E-33

■  

The current time setting is off by one hour.

Possible Cause

Remedy

Page

The period when summer time is applied in the 
location where you are using the watch may be 
different from the period set for your currently 
selected Home City. 

Use the procedure under “To switch between 
standard time and summer time manually” to switch 
from 

AUTO

 to 

STD

 (for standard time) or 

DST

 (for 

summer time).

E-21

■  

Auto Receive is not performed or I cannot perform Manual Receive.

Possible Cause

Remedy

Page

Your Home City setting is wrong.

Check your Home City setting and correct it, if 
necessary.

E-11
E-19

There is not enough power for signal reception.

Expose the watch to light to charge it.

E-7

■  

Signal reception is being performed successfully, but the time and/or day is wrong.

Possible Cause

Remedy

Page

Your Home City setting is wrong.

Check your Home City setting and correct it, if 
necessary.

E-11
E-19

The watch may have been exposed to magnetism 
or strong impact, which has caused problems with 
proper hand and day indicator alignment.

Adjust the watch’s hand and day indicator home 
positions.

E-27

E-32

Time Calibration Signal

The information in this section applies only when 

LONDON

 (

LON

), 

PARIS

 (

PAR

), 

ATHENS

 (

ATH

), 

HONOLULU

 (

HNL

), 

ANCHORAGE

 (

ANC

), 

LOS ANGELES

 (

LAX

), 

DENVER

 (

DEN

), 

CHICAGO

 (

CHI

), 

NEW YORK

 (

NYC

), 

HONG KONG

 (

HKG

), or 

TOKYO

 (

TYO

) is selected as the Home City. You need to 

adjust the current time manually when any other city is selected as the Home City.

■  

The 

2

 

Second Hand

 indicates NO (N) when I check the result of the latest receive operation.

Possible Cause

Remedy

Page

 

x

 You are wearing or moving the watch, or 

performing a button operation during the signal 
receive operation.

 

x

 The watch is in an area with poor reception 

conditions.

Keep the watch in an area where reception 
conditions are good while the signal receive 
operation is being performed.

E-13

You are in an area where signal reception is not 
possible for some reason.

See “Approximate Reception Ranges”.

E-12

The calibration signal is not being transmitted for 
some reason.

 

x

 Check the website of the organization that 

maintains the time calibration signal in your area 
for information about its down times.

 

x

 Try again later.

■  

The current time setting changes after I set it manually.

You may have the watch confi gured for Auto Receive of the time calibration signal (page E-14), which will 
cause the time to be adjusted automatically according to your currently selected Home City. If this results 
in the wrong time setting, check your Home City setting and correct it, if necessary (page E-19).

L-3

City Code

City

UTC Offset/

GMT Differential

Summer Time Period

Summer Time Start

Summer Time End

DUBAI

(DXB)

Dubai

+4

None

None

KABUL

( K B L )

Kabul

+4.5

KARACHI

( K H I )

Karachi

+5

DELHI

( D E L )

Delhi

+5.5

DHAKA

(DAC)

Dhaka

+6

YANGON

(RGN)

Yangon

+6.5

BANGKOK

(BKK)

Bangkok

+7

HONG KONG

(HKG)

Hong Kong

+8

TOKYO

(TYO)

Tokyo

+9

ADELAIDE

(ADL)

Adelaide

+9.5

02:00, fi rst Sunday in 

October

03:00, fi rst Sunday in April

SYDNEY

(SYD)

Sydney

+10

NOUMEA

(NOU)

Noumea

+11

None

None

WELLINGTON

(WLG)

Wellington

+12

02:00, last Sunday in 

September

03:00, fi rst Sunday in April

 

x

Based on data as of June 2013.

 

x

The rules governing global times (UTC offset and GMT differential) and summer time are determined 
by each individual country.

 

x

The summer time periods in this table are applicable to specifi c cities. For cities not included in the 
list, select the list city that is in the same time zone as the desired city and perform STD/DST settings 
manually.

L-2

City Code Table

City Code

City

UTC Offset/

GMT Differential

Summer Time Period

Summer Time Start

Summer Time End

PAGO PAGO

(PPG)

Pago Pago

–11

None

None

HONOLULU

(HNL)

Honolulu

–10

ANCHORAGE

(ANC)

Anchorage

–9

02:00, second Sunday 

in March

02:00, fi rst Sunday in 

November

LOS ANGELES ( L A X )

Los Angeles

–8

DENVER

(DEN)

Denver

–7

CHICAGO

( C H I )

Chicago

–6

NEW YORK

(NYC)

New York

–5

SANTIAGO

( S C L )

Santiago

–4

24:00, second Saturday in 

October

24:00, second Saturday 

in March

RIO

Rio De Janeiro

–3

0:00, third Sunday in 

October

0:00, third Sunday in 

February or 0:00, fourth 

Sunday in February

F. DE NORONHA ( F E N ) Fernando de Noronha

–2

None

None

PRAIA

( R A I )

Praia

–1

UTC

0

LONDON

(LON)

London

01:00, last Sunday in 

March

02:00, last Sunday in 

October

PARIS

(PAR)

Paris

+1

02:00, last Sunday in 

March

03:00, last Sunday in 

October

ATHENS

(ATH)

Athens

+2

03:00, last Sunday in 

March

04:00, last Sunday in 

October

JEDDAH

( J E D )

Jeddah

+3

None

None

TEHRAN

(THR)

Tehran

+3.5

0:00, March 22 or 

0:00, March 21

0:00, September 22 or 

0:00, September 21

L-1

City Code Table

Содержание 5235






Отзывы: