Casio 4390, Руководство пользователя

Страница: 15 / 75

E-13
3. Hold down
A
for about two seconds to toggle the current Home City between
standard time (STD) and daylight saving time (DST).
•
See “To change the STD/DST setting of a particular city code” (page E-35) for
details.
4. After the settings are the way you want, hold down
B
for about three seconds until
the watch returns to the Timekeeping Mode.
•
As you hold down
B
, the second hand will move to either AM or PM , and then the
watch will enter the Timekeeping Mode.
•
Normally, your watch should show the correct time as soon as you specify your
Home City code. If it does not, it should adjust automatically after the next auto
receive operation. You also can perform manual receive (page E-28) or you can set
the time manually (page E-37).
•
Even if the time calibration signal is received correctly, there are some times when
the analog hands may not indicate the correct time. If this happens, use the
procedures under “Auto Hand Home Position Correction” (page E-41) to check the
home positions of the hands, and make adjustments as required.