Operation Guide 4329
6
■
To turn the alarm on or off
In the Alarm Mode, press the
C
C
C
C
C
button to toggle the alarm
on and off.
•
The watch will beep when you turn on the alarm.
OFF
ON
■
To stop the alarm
Pressing any button while the beeper is sounding stops it.
Using the Alarms
The watch beeps for 10 seconds when the Timekeeping Mode
time reaches the currently set alarm time.
•
The alarm will sound when the current time in your Home City
matches the alarm time.
•
Press the
C
C
C
C
C
button to enter the Alarm Mode.
•
Pressing the
C
button in the Chronograph Mode will not enter
the Alarm Mode unless the chronograph is reset to zero.
Alarm Setting
(24-hour Format)
Alarm Mode
ON or OFF
•
To return to the Timekeeping Mode from the Alarm Mode,
press the
B
B
B
B
B
button. Note that you cannot return to the
Timekeeping Mode while the watch is in the alarm setting
mode (second hand pointing at “0”.) In this case, press the
A
A
A
A
A
button to exit the alarm setting mode before pressing the
B
B
B
B
B
button.
3.
When the setting is the
way you want, press the
A
A
A
A
A
button to exit the
alarm setting mode.
•
This will exit the alarm
setting mode and the
second hand will resume
normal operation.
•
The watch will exit the alarm
setting mode automatically if
you do not perform any
button operation for about
two or three minutes.
■
To set an alarm time
Example:
To change the alarm setting from midnight to 3:00 p.m.
1.
In the Alarm Mode, hold
down the
A
A
A
A
A
button for
about five seconds.
•
The indicator hand will move
to “ON”, and the second
hand will move to “0”. This is
the alarm setting mode.
2.
Use the
D
D
D
D
D
(+) and
B
B
B
B
B
(–)
buttons to change the
alarm setting in one-
minute increments.
•
Holding down either button
will cause the alarm time
hands to move at high
speed. Once started, high-
speed movement will
continue even if you release
the button. To stop high-
speed hand movement,
press any button.
•
The alarm time uses 24-
hour timekeeping format.
ON
Second Hand
(+)
(–)
Alarm time
2.
Use the
D
D
D
D
D
(+) and
B
B
B
B
B
(–)
buttons to change the
hour and minute setting.
•
Each press of either button
changes the setting by one
minute.
•
Holding down either button
will cause the hands to
move at high speed. Once
started, high-speed
movement will continue
even if you release the
button. To stop high-speed
hand movement, press any
button.
•
Note that the time setting
uses 24-hour format.
3.
Press the
C
C
C
C
C
button to advance the date setting by one
day.
Setting the Time and
Date Manually
You can perform the following procedures to adjust the time
and date when the watch is unable to receive a time
calibration signal for some reason.
1.
In the Timekeeping Mode
hold down the
A
A
A
A
A
button
for about five seconds.
•
The indicator hand will move to
12 o’clock, and the second
hand will move to “0”.
•
After the indicator hand
indicates the result of the last
signal reception result, it will
move to the “READY” position.
Keep the
A
button depressed
until the indicator hand to
moves to 12 o’clock.
Hour,
Minute
(+)
Hour, Minute
(–)
Date (+)
24-hour Hand
Indicator Hand
Second Hand
4.
When the setting is the
way you want, press the
A
A
A
A
A
button to exit setting
mode.
•
This will exit setting mode
and the second hand will
resume normal operation.
•
Pressing
A
to restart
timekeeping on a time signal
on the TV or radio ensures
precise setting.
•
The watch will exit setting
mode automatically if you do
not perform any button
operation for about two or
three minutes.
When you are using the watch in an area that supports time
calibration signal reception, it will adjust the date automatically
for month lengths and leap years. If you use it in an area that
does not support signal reception, you will have to make
adjustments for month lengths and leap year manually.
