manualshive.com logo in svg

Casio 3522, Руководство по эксплуатации, Страница: 6 / 18

Поделиться
Скачать
Casio 3522 Скачать руководство пользователя страница 6

Navigating Between Modes

Press (C) to cycle between modes.

C

C

C

C

C

C

World Time Mode

Timekeeping Mode

Timer Mode

Tide/Moon Mode

Stopwatch Mode

Alarm Mode

Viewing the Face in the Dark

The watch has a light that illuminates the face
for viewing in the dark.

●

Turning On Display Illumination

Press (B) to turn on illumination.

●

Illumination will turn off automatically if an
alarm starts to sound.

Important!

●

Frequent use of illumination will run
down the battery.

Note

●

Display illumination is disabled when
any one of the conditions below exists.

ー　

Alarm, timer alert, or other beeper
sounding

●

Specifying the Illumination Duration

You can select either 1.5 seconds or three
seconds as the illumination duration.

1.

Enter the Timekeeping Mode.

l

Navigating Between Modes

2.

Hold down (A) for at least one second.
Release the button when the seconds
start to flash.

Seconds

3.

Press (B) to select an illumination
duration.

[ ]: 1.5-second illumination

[

]: 3-second illumination

4.

Press (A) twice to complete the setting
operation.

Note

●

While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.

Watch Operation Guide 3522

6

Содержание 3522



















Отзывы:

Нет отзывов