Casio 3521, Руководство по эксплуатации, Страница: 9 / 21

Time Adjustment
Use the procedures in this section to adjust the
date and time settings.
Adjusting the Current Time
Setting
Use the procedures below to adjust the
current date and time settings, and to select a
Home City.
●
Setting a Home City
Use the procedure in this section to select a
city to use as your Home City. If you are in an
area that observes summer time, you can also
configure a summer time setting.
1.
Enter the Timekeeping Mode.
l
Navigating Between Modes
2.
Hold down (A) for at least two seconds.
Release the button when the city code
starts to flash.
City code
3.
Use (B) and (D) to change the Home City
setting.
●
Holding down (B) or (D) scrolls through
settings at high speed.
●
For details refer to the information
below.
l
City Table
4.
Press (C).
5.
Use (D) to change the summer time
setting.
●
[OFF]
The watch always indicates standard
time.
●
[ON]
The watch always indicates summer
time.
6.
Press (A) to complete the setting
operation.
Note
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
●
Setting the Time/Date
Important!
●
Configure the Home City setting before
changing the current time and date
settings.
l
Setting a Home City
1.
Enter the Timekeeping Mode.
l
Navigating Between Modes
2.
Hold down (A) for at least two seconds.
Release the button when the city code
starts to flash.
City code
3.
Use (C) to display the setting you want to
change.
●
Each press of (C) cycles through
settings in the sequence shown below.
Summer time
Home City
Minutes
Hours
Seconds
Illumination duration
Day
Month
Year
12/24-hour timekeeping
Operation tone enable/disable
Power Saving
Watch Operation Guide 3521
9