Casio 3503 Скачать руководство пользователя страница 31

EN-29

 

Battery Replacement

 

 

Leave battery replacement up to your original retailer or authorized CASIO service 
center.

 

 

Have the battery replaced only with the type specified in the User’s Guide. Use of a 
different battery type can cause malfunction.

 

 

When replacing the battery, also request a check for proper water resistance.

 

 

Ornamental resin components may become worn, cracked, or bent over 
time when subjected to normal daily use. Note that if cracking or any other 
abnormality indicating possible damage is noticed in a watch submitted for battery 
replacement, your watch will be returned with an explanation of the abnormality, 
without the requested servicing being performed.

Initial Battery

 

 

The battery that comes loaded in your watch when you purchase it is used for 
function and performance testing at the factory.

 

 

The test battery may go dead quicker than the normally rated battery life as noted 
in the User’s Guide. Note that you will be charged for replacement of this battery, 
even if replacement is required within your watch’s warranty period.

Содержание 3503


































Отзывы: