User’s Guide 3499
E-15
Temperature Sensor Precision:
±2°C (±3.6°F) in range of –10°C to 60°C (14.0°F to 140.0°F)
Sunrise/sunset:
Sunrise/sunset time display; selectable date
Stopwatch:
Measuring unit: 1/10 second
Measuring capacity: 999:59' 59.9"
Measuring accuracy: ±0.0006%
Measuring modes: Elapsed time, split time, two finishes
Countdown Timer:
Measuring unit: 1 second
Countdown range: 24 hours
Setting unit: 1 minute
Alarms:
5 Daily alarms (with one snooze alarm); Hourly time signal
World Time:
48 cities (31 time zones)
Other: Daylight Saving Time/Standard Time
Illumination:
LED light; Selectable illumination duration (approximately 1.5 seconds or 3 seconds);
Auto Light Switch (Full Auto Light operates only in the dark)
Other:
Battery power indicator; Power Saving; Low-temperature resistance (–10°C/14°F); Button
operation tone on/off
E-14
Altimeter:
Measurement range: –700 to 10,000 m (or –2,300 to 32,800 ft.) without reference altitude
Display range: –10,000 to 10,000 m (or –32,800 to 32,800 ft.)
Negative values can be caused by readings produced based on a reference altitude or due to
atmospheric conditions.
Display unit: 1 m (or 5 ft.)
Current Altitude Data: Every second for the first 3 minutes, followed by every 5 seconds for
approximately 1 hour (
0'05
); every second for the first 3 minutes, followed
by every 2 minutes for approximately 12 hours (
2'00
)
Altitude Memory Data:
Manually saved records: 30 (altitude, date, time)
Auto saved values: One set of high altitude and its reading date and time, low altitude and its
reading date and time, total ascent and its save start date and time, total
descent and its save start date and time
Trek log data: High altitude, low altitude, cumulative ascent, cumulative descent for up to 14
treks
Other: Reference altitude setting; Altitude differential; Altitude auto measurement interval (
0'05
or
2'00
)
Bearing Sensor Precision:
Direction: Within ±10°
Values are guaranteed for a temperature range of –10°C to 60°C (14°F to 140°F).
North pointer: Within ±2 digital segments
Pressure Sensor Precision:
Measurement accuracy: Within ±3 hPa (0.1 inHg) (Altimeter accuracy: Within ±75m (246 ft.))
x
Values are guaranteed for a temperature range of –10°C to 40°C (14°F to 104°F).
x
Precision is lessened by strong impact to either the watch or the sensor, and by temperature
extremes.
E-13
Specifications
Accuracy at normal temperature:
±15 seconds a month
Timekeeping:
Hour, minute, second, p.m. (P), year, month, day, day of the week
Time format: 12-hour and 24-hour
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Other: Three display formats (day of the week/day screen, month/day screen, barometric pressure
graph screen); Home City code (can be assigned one of 48 city codes); Standard Time /
Daylight Saving Time (summer time)
Year display on setting screen only.
Digital Compass:
60 seconds continuous reading; 16 directions; Angle value 0° to 359°; Four
direction pointers; Calibration (bidirectional); Magnetic declination correction;
Bearing Memory
Barometer:
Measurement and display range:
260 to 1,100 hPa (or 7.65 to 32.45 inHg)
Display unit: 1 hPa (or 0.05 inHg)
Reading timing: Daily from midnight, at two-hour intervals (12 times per day); Every five seconds
in the Barometer/Thermometer Mode
Other: Calibration; Manual reading (button operation); Barometric pressure graph; Barometric
pressure differential pointer; Barometric pressure change indicator
Thermometer:
Measurement and display range: –10.0 to 60.0°C (or 14.0 to 140.0°F)
Display unit: 0.1°C (or 0.2°F)
Reading timing: Every five seconds in the Barometer/Thermometer Mode
Other: Calibration; Manual reading (button operation)
E-12
Mode Settings
For full details about timer, alarm, World Time City summer time, and other settings, and about
calibrating measurements (direction, altitude, barometric pressure, temperature), refer to the
Operation Guide available at the CASIO website.
E-11
Screen
To do this:
Do this:
Reset the second to
00
(If the current seconds count is between 30 and 59,
one is added to the minute count).
Press
A
.
Change the hour or minute
Use
A
(+) and
C
(–).
Change the year, month, or day
4. After all of the settings are the way you want, press
E
twice to exit the setting screen.
E-10
Changing the Current Time and Date Settings
1. In the Timekeeping Mode, hold down
E
for at least two seconds. Keep
E
depressed until the
city code and city name starts to scroll.
2. Press
D
to move the flashing in the sequence shown below to select the other settings.
City Code
DST
Year
Thermometer/Barometer/
Altitude display unit
12/24-Hour
Format
Second
Hour
Minute
Month
Day
Button Operation
Tone
Illumination
Duration
Power
Saving
3. When the timekeeping setting you want to change is flashing, use
A
and/or
C
to change it as
described below.
Screen
To do this:
Do this:
Change the city code
Use
A
(East) and
C
(West).
Toggle between Daylight Saving Time (
ON
) and
Standard Time (
OFF
).
Press
A
.
Toggle between 12-hour (
12H
) and 24-hour (
24H
)
timekeeping.
Press
A
.
E-9
Data Recall Mode
Stopwatch Mode
Alarm Mode
Timer Mode
Last displayed record
x
Scroll
x
Scroll
x
Select data type
Minutes Seconds
1/10 second
Hours
x
Split
x
Reset
x
Start
x
Stop
x
Reset
x
Start
x
Stop
Minutes
Seconds
x
Scroll
x
Scroll
x
On/Off
D
D
D
D
E-8
Navigating to Other Modes
Timekeeping Mode
Sunrise/Sunset Mode
World Time Mode
Month, day
x
Select screen
Barometric pressure
graph
Day of the week, day
x
Scroll
x
Scroll
Sunset time
Sunrise time
Home City time
World Time City
time
World Time City
code
x
Scroll
x
Scroll
D
D
D