Connection
Connecting with a Phone
This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
●
If the watch is not paired with the phone you
want to connect with, refer to the information
below and pair them.
l
1.
Move the phone close to (within one meter
of) the watch.
2.
X
Hold down (C) for about three seconds
until
e
and [CNCT] flash on the display.
When a connection is established
between the watch and phone,
e
and
[CNCT] will stop flashing.
●
If connection fails for some reason, [NG]
or [ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
Connected
Important!
●
If you have problems establishing a
connection, it could mean that G-
SHOCK Connected is not running on
the phone. On the phone’s home
screen, tap the “G-SHOCK
Connected” icon. After the app starts
up, hold down the watch’s (C) button
for about three seconds.
Note
●
The connection will be terminated if
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with G-
SHOCK Connected: “Watch
settings”
n
“Connection time”. Next,
select a setting of 3 minutes, 5 minutes,
or 10 minutes.
Disconnecting from a Phone
Pressing any button will terminate a Bluetooth
connection and return to the Timekeeping
Mode.
Connected
After disconnection
Unpairing
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
Connected
After disconnection
2.
Y
Tap the “G-SHOCK Connected” icon.
3.
Y
Perform the operation shown on the
phone screen to unpair.
If you purchase another phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
Reminders
If you use G-SHOCK Connected to record an
appointment, anniversary, or some other
event you don’t want to forget, the watch will
remind you when that day is reached.
Getting Ready
Enter the Timekeeping Mode.
l
Recording an Appointment
or Anniversary
You can connect the watch with a phone and
use G-SHOCK Connected to record
appointments and anniversaries.
l
Checking Reminder
Notifications
[REM] flashes on the display during a day is
when there is an anniversary or event that was
created with G-SHOCK Connected. Pressing
any button other than (B) will the display the
title assigned to the reminder.
After the title is displayed once, the date of the
reminder will appear with the dot between the
month and day flashing. Pressing (A) while the
dot is flashing will display the title again.
Note
●
If you turn on display illumination on a
reminder date, the display light will
flash red for a few seconds after
illumination automatically turns off.
Operation Guide 3459/3461
11
