Operation Guide 3423
Press
C
to end setting.
5.
Hold down
C
for about two
seconds.
[SET Hold] will appear and
the time offset value will
flash.
a.
Time
differential
Press
B
10
times
to
display
the
illumination
duration
setting
screen.
Press
D
to
select
[LT1]
(1.5
2.
3.
4.
seconds) or [LT3] (3
seconds).
Hold down
L
for about three
seconds.
This cause the Auto Light ON
indicator to appear on the
display.
a.
Auto
Light
ON
indicator
2.
Important!
While
Auto
Light
is
enabled,
display
illumination
will
turn
on
whenever
you
wrist
is
in
certain
positions,
even
if
you
are not looking at the watch.
This can shorten battery life.
Enabling Auto Light
Use the procedure below to
enable Auto Light, which will
automatically turn on display
illumination whenever you tilt the
watch towards for face to read it.
Enabling Auto Light
Press
B
to switch to the
Timekeeping Mode.
See:
Mode Switching
1.
Other Settings
Button Operation Tone
Setting
Tone sounds or no sound when
a button is pressed can be set.
Press
B
to switch to the
Timekeeping Mode.
See:
Mode Switching
1.
Hold down
B
for about two
seconds.
[SET Hold] will appear and
the time offset value will
flash.
a.
Time
offset
Press
B
nine
times
to
display
the
button
operation
tone
setting
screen.
Press
D
to
select
[KEY
ƈ
]
or
[MUTE].
Selecting
[MUTE]
causes
a
mute
indicator
to
light
and
the
button
operation
tone
will
not
sound.
a. Mute indicator
Press
C
to end setting.
2.
3.
4.
5.