Operation Guide 3290
E-9
4. Press
A
to exit the setting screen.
x
Resetting the seconds to while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to without changing the minutes.
x
With the 12-hour format, the
P
(PM) indicator appears on the display for times in the
range of noon to 11:59 p.m. and the
A
(AM) indicator appears for times in the range
of midnight to 11:59 a.m.
x
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
x
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all modes.
x
The year can be set in the range of 2000 to 2099.
x
The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch’s battery replaced.
x
The day of the week is automatically displayed in accordance with the date (year,
month, and day) settings.
E-8
3. When the setting you want to change is fl ashing, use
D
and
B
to change it as
described below.
Screen
To do this:
Do this:
Reset the seconds to
Press
D
.
Change the city code
Use
D
(east) and
B
(west).
Toggle between Daylight Saving Time (
)
and Standard Time (
)
Press
D
.
Change the hour or minutes
Use
D
(+) and
B
(–).
Toggle between 12-hour (
) and 24-hour
(
) timekeeping
Press
D
.
Change the year, month, or day
Use
D
(+) and
B
(–).
x
See “Daylight Saving Time (DST)” (page E-10) for details about the DST setting.
E-7
To set the time and date
1. In the Timekeeping Mode, hold down
A
until the
seconds start to fl ash, which indicates the setting
screen.
2. Press
C
to move the fl ashing in the sequence shown
below to select other settings.
Seconds
City Code
Day
Minutes
12/24-Hour Format
DST
Hour
Month
Year
C
C
C
C
C
C
C
C
C
E-6
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
Read this before you set the time and date !
The times displayed in the Timekeeping Mode and World
Time Mode are linked. Because of this, make sure you
select a city code for your Home City (the city where you
normally use the watch) before you set the time and date.
x
To view the current Home City code setting, press
A
while in the Timekeeping Mode.
x
For full information on city codes, see the “City Code
Table” at the back of this manual.
Seconds
Hour : Minutes
PM indicator
Day of week
Day
E-5
C
C
C
Stopwatch Mode
Countdown Timer Mode
Alarm Mode
E-4
General Guide
x
Press
C
to change from mode to mode.
x
In any mode (except when a setting screen is on the display), press
B
to illuminate
the display.
Timekeeping Mode
C
World Time Mode
C
E-3
To illuminate the display .......................................................................................E-23
To specify the illumination duration ...................................................................E-23
To turn the button operation tone on and off .....................................................E-24
E-2
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date .........................................................................................E-7
To toggle the Timekeeping Mode time between DST and Standard Time .......E-10
To view the time in another city code ..................................................................E-11
To toggle a city code time between Standard Time
and Daylight Saving Time .................................................................................E-12
To measure times with the stopwatch .................................................................E-14
To use the countdown timer .................................................................................E-15
To set the countdown start time ..........................................................................E-16
To set an alarm time ..............................................................................................E-18
To test the alarm ....................................................................................................E-19
To turn an alarm on and off ..................................................................................E-20
To turn the Hourly Time Signal on and off ..........................................................E-21
E-1
Contents
General Guide ..........................................................................................................E-4
Timekeeping .............................................................................................................E-6
World Time .............................................................................................................E-11
Stopwatch ..............................................................................................................E-13
Countdown Timer ..................................................................................................E-15
Alarms ....................................................................................................................E-17
Illumination ............................................................................................................E-22
Reference ...............................................................................................................E-24
Specifi cations ........................................................................................................E-27
E
About This Manual
x
All of the displays in this manual show black-on-white.
x
Button operations are indicated using the letters shown
in the illustration.
x
Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
MA1310-EA
© 2014 CASIO COMPUTER CO., LTD.