Operation Guide 3227
E-10
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle the Timekeeping Mode time between DST and Standard Time
Holding down
C
for about two seconds in the
Timekeeping Mode toggles between Daylight Saving Time
(
DST
displayed) and Standard Time (
DST
not displayed).
•
Note that pressing
C
in the Timekeeping Mode also
toggles between 12-hour timekeeping and 24-hour
timekeeping.
•
The DST indicator appears on the display to indicate
that Daylight Saving Time is turned on.
DST indicator
E-11
To display the Dual Time screen and Data Bank screen in the Timekeeping Mode
Holding down
D
in the Timekeeping Mode displays the Dual Time screen. Holding
down
E
displays the record you were viewing when you last used the Data Bank
Mode.
Dual Time Screen
Data Bank Screen
Hold down
D
.
Hold down
E
.
E-12
Data Bank
The Data Bank Mode lets you store up to 30 records,
each containing name and telephone number data.
Records are automatically sorted based on the characters
of the name. You can recall records by scrolling through
them on the display.
•
The characters you can input for the name depend on
the language you select in the Timekeeping Mode. See
“To set the time, date and language” (page E-6) for more
information. Changing the language setting does not
affect names that are already stored.
•
All of the operations in this section are performed in the
Data Bank Mode, which you enter by pressing
B
(page
E-4).
Name
Telephone number
Remaining number of records
E-13
To create a new Data Bank record
1. In the Data Bank Mode, press
C
to display the new
record screen.
•
The new record screen is the one that is blank
(contains no name and telephone number).
•
If the new record screen does not appear when you
press
C
, it means that memory is full. To store
another record, you will first have to delete some of
the records stored in memory.
2. Hold down
A
until the flashing cursor (
_
) appears in
the name area of the display. This is the record input
screen.
3. In the name area, use
E
and
D
to cycle through
characters at the cursor position. The characters cycle
in the sequence shown below.
Number area
New Record Screen
Name area
l ll
ll
ll
ll
ll
l l l
E-14
•
The above character sequence is for English input. See “Character List” at the
back of this manual for the character sequences of other languages.
4. When the character you want is at the cursor position, press
C
to move the cursor
to the right.
5. Repeat steps 3 and 4 until the name is complete.
•
You can input up to eight characters for the name.
6. After you input the name, press
C
as many times as necessary to move the cursor
to the number area.
•
When the cursor is located at the eighth space of the name area, moving the
cursor to the right causes it to jump to the first digit of the number. When the
cursor is at the 15th digit of the number, moving it to the right (by pressing
C
)
causes it to jump to the first character in the name.
•
Pressing
C
moves the cursor the right, while
B
moves it to the left.
(space)
A
to
Z
(alphabet)
@
to
-
(symbol)
0
to
9
(number)
Press
E
.
Press
D
.
E-15
7. In the number area, use
E
and
D
to cycle through numbers and symbols
(hyphen, brackets, space) at the cursor position. The characters cycle in the
sequence shown below.
8. When the character you want is at the cursor position, press
C
to move the cursor
to the right.
9. Repeat steps 7 and 8 until you complete number input.
•
The number area initially contains all hyphens. You can leave the hyphens or
replace them with numbers or other symbols (brackets, space).
•
You can input up to 15 digits for the number.
10. Press
A
to store your data and exit the Data Bank record input screen.
•
When you press
A
to store data, the name and number you input flash for about
one second as Data Bank records are sorted. After the sort operation is complete,
the Data Bank record screen appears.
x
0
to
9
[
]
(space)
Press
E
.
Press
D
.
E-16
•
The name can show only three characters at a time, so longer text scrolls
continuously from right to left. The last character is indicated by the symbol after it.
To recall Data Bank records
In the Data Bank Mode, use
E
(+) and
D
(–) to scroll through Data Bank records on
the display.
•
See “Sort Table” at the back of this manual for details on how the watch sorts
records.
•
Pressing
E
while the last Data Bank record is on the display or
D
while the first
record is on the display displays the new data screen.
To edit a Data Bank record
1. In the Data Bank Mode, use
E
(+) and
D
(–) to scroll through the records and
display the one you want to edit.
2. Hold down
A
until the flashing cursor appears on the display. This is the record
input screen.
3. Use
C
(right) and
B
(left) to move the flashing to the character you want to
change.
4. Use
E
(forward) and
D
(back) to change the character.
E-17
5. After making the changes that you want, press
A
to store them and exit the Data
Bank record input screen.
To delete a Data Bank record
1. In the Data Bank Mode, use
E
(+) and
D
(–) to scroll through the records and
display the one you want to delete.
2. Hold down
A
until the flashing cursor appears on the display. This is the record
input screen.
3. Press
B
and
C
at the same time to delete the record.
•
CLR
appears to indicate that the record is being deleted. After the record is
deleted, the cursor appears on the display, ready for input.
4. Input data or press
A
to return to the Data Bank record screen.
E-18
Alarms
You can set up to five independent multi-function alarms
with hour, minutes, month, and day. When an alarm is
turned on, the alarm tone sounds when the alarm time is
reached. One of the alarms can be configured as a
snooze alarm or a one-time alarm, while the other four are
one-time alarms.
You can also turn on an Hourly Time Signal, which will
causes the watch to beep twice every hour on the hour.
•
There are five alarm screens numbered
1
through
5
.
The Hourly Time Signal screen is indicated by
:00
.
•
All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing
B
(page
E-5).
Alarm time
(Hour : Minutes)
Alarm number
Alarm date
(Month–Day)
Timekeeping
Mode time
Alarm Screen
Hourly Time Signal Screen
E-19
Alarm Types
The alarm type is determined by the settings you make, as described below.
•
Daily alarm
Set the hour and minutes for the alarm time. This type of setting causes the alarm to
sound everyday at the time you set.
•
Date alarm
Set the month, day, hour and minutes for the alarm time. This type of setting causes
the alarm to sound at the specific time, on the specific date you set.
•
1-Month alarm
Set the month, hour and minutes for the alarm time. This type of setting causes the
alarm to sound everyday at the time you set, only during the month you set.
•
Monthly alarm
Set the day, hour and minutes for the alarm time. This type of setting causes the alarm
to sound every month at the time you set, on the day you set.
Note
The 12-hour/24-hour format of the alarm time matches the format you select in the
Timekeeping Mode.