Operation Guide 3107
5
Setting the Time and Date Manually
Make sure you select your Home City code before you change the current time and
date settings. World Time Mode times are all displayed in accordance with the
Timekeeping Mode settings. Because of this, World Time Mode times will not be
correct if you do not select the proper Home City code before setting the time and
date in the Timekeeping Mode.
To set the time and date manually
1. In the Timekeeping Mode, hold down
A
until the city
code starts to flash, which indicates the setting screen.
2. Press
C
to change the flashing contents in the
sequence shown below to select other settings.
l ll
ll
ll
ll
ll
l l l l
City code
3. When the setting you want to change is flashing, use
B
and/or
D
to change it as
described below.
Seconds
Hour
Minutes
12/24-Hour
Format
Month
Year
DST
Day
Power
Saving
City Code
Screen:
To do this:
Change the city code
Cycle between auto DST (
),
Standard Time (
), and
Daylight Saving Time (
)
Toggle between 12-hour (
12H
) and
24-hour (
2
4
H
) timekeeping
Do this:
Use
D
(east) and
B
(west).
Press
D
.
Press
D
.
TYO
•
See “City Code Table” for a complete list of available city codes.
Reset the seconds to
Change the hour or minutes
Change the year, month, or day
Toggle Power Saving on (
) and
off (
)
Press
D
.
Use
D
(+) and
B
(–).
Press
D
.
•
Auto DST (
) can be selected only while
LIS
,
LON
,
MAD
,
PAR
,
ROM
,
BER
,
STO
,
ATH
,
MOW
,
HKG
,
BJS
,
TPE
,
SEL
,
TYO
,
HNL
,
ANC
,
YVR
,
LAX
,
YEA
,
DEN
,
MEX
,
YWG
,
CHI
,
MIA
,
YTO
,
NYC
,
YHZ
, or
YYT
is selected as the Home City
code. For more information, see “Daylight Saving Time (DST)” below.
•
For information about settings other than the time and date, see the following.
Power Saving: Power Saving Function
4. Press
A
to exit the setting screen.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
The time calibration signals transmitted from Mainflingen (Germany), Anthorn
(England), or Fort Collins (the United States) include both Standard Time and DST
data. When the Auto DST setting is turned on, the watch switches between Standard
Time and DST (summer time) automatically in accordance with the signals.
•
The time calibration signals transmitted from Fukushima and Fukuoka/Saga (Japan)
do not include summer time data.
•
The default DST setting is Auto DST (
) whenever you select
LIS
,
LON
,
MAD
,
PAR
,
ROM
,
BER
,
STO
,
ATH
,
MOW
,
HKG
,
BJS
,
TPE
,
SEL
,
TYO
,
HNL
,
ANC
,
YVR
,
LAX
,
YEA
,
DEN
,
MEX
,
YWG
,
CHI
,
MIA
,
YTO
,
NYC
,
YHZ
, or
YYT
as your Home City
code.
•
If you experience problems receiving the time calibration signal in your area, it
probably is best to switch between Standard Time and Daylight Saving Time
(summer time) manually.
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down
A
until the city code starts to flash, which
indicates the setting screen.
2. Press
C
and the DST setting screen appears.
3. Use
D
to cycle through the DST settings in the sequence shown below.
Auto DST (
)
DST off (
)
DST on (
)
4. When the setting you want is selected, press
A
to exit the setting screen.
•
The
DST
indicator appears to indicate that Daylight Saving Time is turned on.
Reference
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
Button Operation Tone
The button operation tone sounds any time you press one
of the watch’s buttons. You can turn the button operation
tone on or off as desired.
•
Even if you turn off the button operation tone, the alarm,
Hourly Time Signal, and Countdown Timer Mode alarm
all operate normally.
To turn the button operation tone on and off
In any mode (except when a setting screen is on the
display), hold down
C
to toggle the button operation tone
on (mute indicator not displayed) and off (mute indicator
displayed).
Mute indicator
•
Since the
C
button is also the mode change button, holding it down to turn the
button operation tone on or off also causes the watch’s current mode to change.
•
The mute indicator is displayed in all modes when the button operation tone is
turned off.
Power Saving Function
When turned on, the Power Saving function enters a sleep
state automatically whenever the watch is left in an area
where it is dark for a certain period. The table below
shows how watch functions are affected by the Power
Saving function.
ll
ll
ll
ll
ll
l l l
Power saving indicator
•
Wearing the watch inside the sleeve of clothing can cause it to enter the sleep state.
•
The watch will not enter the sleep state between 6:00 AM and 9:59 PM. If the watch
is already in the sleep state when 6:00 AM arrives, however, it will remain in the
sleep state.
To recover from the sleep state
Perform any one of the following operations.
•
Move the watch to a well-lit area.
•
Press any button.
Elapsed Time
in Dark
60 to 70 minutes
6 or 7 days
Display
Blank, with Power Saving
indicator (
PS
) flashing
Blank, with Power Saving
indicator (
PS
) not flashing
Operation
All functions enabled, except
for the display
Beeper tone, illumination, and
display are disabled.
To turn Power Saving on and off
1. In the Timekeeping Mode, hold down
A
until the city
code starts to flash, which indicates the setting screen.
2. Press
C
nine times until the Power Saving on/off
screen appears.
3. Press
D
to toggle Power Saving on (
) and off
(
).
4. Press
A
to exit the setting screen.
•
The Power Saving indicator (
PS
) is on the display in all
modes while Power Saving is turned on.
Auto Return Features
•
If you leave the watch in the Alarm Mode for two or three minutes without performing
any operation, it returns to the Timekeeping Mode automatically.
•
If you leave the watch with a flashing setting on the display for two or three minutes
without performing any operation, the watch exits the setting screen automatically.
ll
ll
ll
ll
ll
l l l
l l
ll
ll
ll
ll
l l l
On/Off status
Scrolling
The
B
and
D
are used in various modes and setting screens to scroll through data.
In most cases, holding down these buttons during a scroll operation scrolls through
the data at high speed.
Initial Screens
When you enter the World Time or Alarm Mode, the data you were viewing when you
last exited the mode appears first.
Radio-controlled Atomic Timekeeping Precautions
•
Strong electrostatic charge can result in the wrong time being set.
•
The time calibration signal is bounced off the ionosphere. Because of this, such
factors as changes in the reflectivity of the ionosphere, as well as movement of the
ionosphere to higher altitudes due to seasonal atmospheric changes or the time of
day may change the reception range of the signal and make reception temporarily
impossible.
•
Even if the time calibration signal is received properly, certain conditions can cause
the time setting to be off by up to one second.
•
The current time setting in accordance with the time calibration signal takes priority
over any time settings you make.
•
The watch is designed to update the date and day of the week automatically for the
period January 1, 2000 to December 31, 2099. Setting of the date by a time
calibration signal cannot be performed starting from January 1, 2100.
•
This watch can receive signals that differentiate between leap years and non-leap
years.
•
Though this watch is designed to receive both time data (hour, minutes, seconds)
and date data (year, month, day), certain signal conditions can limit reception to time
data only.
•
Normally, the signal reception date shown by the Last Signal screen is the date data
included in the received time calibration signal. When only time data is received,
however, the Last Signal screen shows the date as kept in the Timekeeping Mode at
the time of signal reception.
•
If you are in an area where proper time calibration signal reception is impossible, the
watch keeps time with the precision noted in “Specifications”.
•
If you have problems with proper time calibration signal reception or if the time
setting is wrong after signal reception, check your current city code, DST (summer
time), and auto receive settings.
Timekeeping
•
Resetting the seconds to
00
while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to
00
without changing the minutes.
•
The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
•
The year can be set in the range of 2000 to 2099.
•
The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch’s battery replaced or when battery power drops to
Level 5.
•
The times for the Timekeeping Mode and all the city codes of the World Time Mode
are calculated in accordance with each city’s UTC differential.
•
The UTC differential is a value that indicates the time difference between a
reference point in Greenwich, England and the time zone where a city is located.
•
The letters “UTC” is the abbreviation for “Universal Time Coordinated”, which is the
world-wide scientific standard of timekeeping. It is based upon carefully maintained
atomic (cesium) clocks that keep time accurately to within microseconds. Leap
seconds are added or subtracted as necessary to keep UTC in sync with the Earth’s
rotation.
