4
Operation Guide 2736
Alarm Mode
Using the Alarms
❚
Alarm Types
This watch has five alarms: three daily alarms, one target alarm,
and one snooze alarm.
Daily Alarm (AL1, AL2, AL3)
The watch beeps for 10 seconds when the alarm time is
reached.
Target Alarm (TAL)
The watch beeps for 10 seconds when the alarm time is
reached.
•
With a target alarm, the time remaining until the alarm time
counts down on the display.
Snooze Alarm (SNZ)
With the snooze alarm, the watch beeps for 10 seconds when
the alarm time is reached, and up to seven times at five-
minute intervals thereafter. Pressing any button stops the
beeper, but the alarm will sound again after five minutes.
❚
To view an alarm time
In the Alarm Mode, press the
D
D
D
D
D
button.
•
Each press of the
D
button
cycles through available modes in
the sequence shown below.
Alarm 1
(AL1)
Alarm 2
(AL2)
Alarm 3
(AL3)
Hourly Time
Signal (SIG)
Snooze Alarm
(SNZ)
Target Alarm
(TAL)
About the Target Alarm Screen
If the target alarm (TAL) is turned
on, the alarm time appears first,
followed by a screen that shows how
much time remains until the alarm
time is reached (target alarm time).
Alarm Type
Alarm Time
Remaining Time
❚
To set an alarm
1.
In the Alarm Mode, use
the
D
D
D
D
D
button to scroll
through the alarm
screens (AL1 to AL5) until
the one you want is
displayed.
2.
Hold down the
A
A
A
A
A
button
for about two seconds
until the hour digits of the
alarm time start to flash.
•
This is the setting screen.
Displaying the setting
automatically turns on the
alarm.
3.
Use the
D
D
D
D
D
(+) and
B
B
B
B
B
(–)
buttons to change the
hour setting.
•
Holding down either button
changes the setting at high
speed.
•
When setting the hour, make sure you specify AM (no
indicator) or PM (P) correctly when using 12-hour
timekeeping, or that you specify the correct 24-hour time.
•
The same 12-hour/24-hour format you select for the
Timekeeping Mode time is also applied in the Alarm Mode.
4.
Press the
C
C
C
C
C
button to
move the flashing to the
minute digits.
5.
As with the hour setting,
use the
D
D
D
D
D
(+) and
B
B
B
B
B
(–)
buttons to change the
minute setting.
•
Each press of the
C
button
moves the flashing between
the hour digits and the minute
digits as shown below.
Hour
Minute
6.
When the setting is the
way you want, press the
A
A
A
A
A
button.
•
This exits the setting screen.
•
The display also will exit the setting screen automatically if
you do not perform any operation for about two or three
minutes.
Hour
Alarm Indicator
(Forward)
(Back)
(Forward)
(Back)
Minute
❚
To turn an alarm time on or off
1.
In the Alarm Mode, use
the
D
D
D
D
D
button to display
the screen for the alarm
you want to turn on or off.
2.
Press the
A
A
A
A
A
button to
toggle the displayed
alarm on reception on or
off.
•
Turning on an alarm causes the alarm indicator (ALM) to
appear on its screen. The snooze alarm screen also has a
snooze indicator (SNZ).
Alarm 1 Screen
Alarm Indicator
Snooze Alarm Screen
Snooze Indicator
Alarm Indicator
❚
To stop the alarm beeper
Pressing any button while the beeper is sounding stops it.
•
In the case of the snooze alarm the alarm will sound again. The
snooze indicator flashes while the snooze alarm is active
(indicating that the alarm will sound again).
•
Use the procedure under “To turn an alarm on or off” to turn off
the snooze alarm so it does not sound any more.
Important!
Performing any of the following operations while the snooze
indicator is flashing on the display cancels the snooze operation
and stops the flashing.
•
Displaying the Timekeeping Mode setting screen
•
Displaying the Alarm Mode (snooze alarm) setting screen
❚
To test the alarm
In the Alarm Mode, hold down the
D
button to sound the alarm.
Using the Hourly Time Signal
The hourly time signal causes the watch to beep every hour on the
hour.
❚
To turn the hourly time signal on or off
1.
In the Alarm Mode, use
the
D
D
D
D
D
button to display
the screen for the hourly
time signal (SIG).
2.
Press the
A
A
A
A
A
button to
toggle the hourly time
signal on or off.
•
Turning on the hourly time signal causes its indicator (SIG)
to appear on the screen.
Hourly Time Signal Screen
Hourly Time
Signal Indicator
