Cashmaster OMEGA C Fast Charge Series 1000, Инструкция по эксплуатации

Страница: 8 / 12

Page 8
5. Calibrating the Scoop/Till cup
When you power on for the very first time, you must program the Omega “C” with the
weight of the scoop or till cup. You should see the following message on the display
once you have powered up the Omega C:
No Scoop Weight!
Set using F + I/O
Press the < F > and On/Off keys together:
0.00
SCOOP
1c
loose coin mode
Denomination
Starting bank /
total
If at any time you need to set the Omega “C” to use a different scoop or till cup from
that programmed, simply follow the steps above to recalibrate.
The Omega “C” will ask you to place an empty scoop onto the hod. Once you have
done this, the Omega “C” will ask you to remove the scoop.
The Loose Coin mode will be displayed. The Omega “C” is now ready to begin
counting loose coins.
Page 17
13. Counting strapped bills
Select Strapped Bills Verify by pressing the <Strapped Bills> key.
VERIFY BILLS
IN BAND $1
Strapped bill
mode
Denomination
If the denomination is not the one you want, press bill < Ï > or < Ð > until you
reach the correct one.
Place the strap of bills on the cash tray. The Omega “C” accepts bundles of 10, 20,
25, 50 & 100.
If the strapped bundle is good , its value is displayed.
$100
100x$1
IN BUNDLE
Value
Denomination and
number of bills
- here indicates that the bundle is
slightly light
+ here indicates that the bundle is
slightly heavy.
If Auto Add is off , leave the bundle on the tray and press <+> to add to the total;
remove the strapped bundle from the tray.
If
Auto Add is on , remove the strapped bundle from the tray. The Omega “C” will
update the totals and beep to confirm the add.
Repeat above steps for all strapped bills to be counted. To return to loose bill
counting, press the
<Strapped Bills> key.
If a strapped bundle is suspect, the display will show:
* SUSPECT *
* BUNDLE *
You must open the strapped bundle and count the bills in loose bill mode.