Xiamen Cashino Technology Co., Ltd.
KP-628E User manual
21
When n LSB is 0
,
delete customized characters
When n LSB is 1
,
select customized characters
Range
0 ≤ n ≤ 255
Default
0
Notes
When cancel customized characters
,
automatically select the internal
character set.
Example
None
Define user customized characters
Name
Define user customized characters
Code
ASCII
:
ESC & y c1 c2 [x1 d1 ... d (yx1)] ... [xk d1 ... d(y x k)]
DEC
:
27 38 y c1 c2 [x1 d1 ... d(yx1)] ...[xk d1 ... d(yxk)]
HEX
:
1B 26 y c1 c2 [x1 d1...d(y x1)]...[xk d1...d(yxk)]
Function
Define user customized characters.
y specifies vertical direction bytes.
c1 specifies the starting character encoding,c2 specifies the ending
character encoding
xk specifies horizontal direction dots.
Range
The range of x
、
y
,
are correspond with internal fonts.
If choosing Font 6*12
,
y = 2
,
0 ≤ x ≤ 6
If choosing Font 12*24
,
y= 3
,
0 ≤ x ≤ 12
32 ≤ c1 ≤ c2 ≤ 126
0 ≤ d1 ... d(y*xk) ≤255
Default
None
Notes
Definable character code range: from<20>H to <7E>H ASCII code(95
characters)
。
It can define continuous characters encoding for several characters.
When it need one character only, make c1=c2.
d is character’s dot data, dot mode starts from left side in the horizontal
direction. It is blank for the rest dots in the right side.
Defined user defines characters data is (y*x) byte.
Set corresponding bit of printing dots as 1, or corresponding bit of no
printing dots as 0.
This command defines different customized characters for each type of
font. Set font with ESC !.
Customized characters and downlink bitmaps cannot be defined at the
same time. When the command is executed, the downlink bitmap is
cleared.
User Customized characters will be cleared in these situations:
Execute ESC @
。
Execute GS *
。