Cashino CSN-A3, Руководство пользователя

Страница: 38 / 47

Xiamen Cashino Technology Co.,Ltd
A3 User Manual
www.csntek.cn
38
1d 6b 42 0c 30 32 33 34 35 36 30 30 30 30 38 39
1d 6b 43 0c 30 32 33 34 35 36 30 30 30 30 38 39
1d 6b 44 08 30 32 33 34 35 36 30 30
1d 6b 45 08 30 32 33 34 35 36 30 30
1d 6b 46 08 30 32 33 34 35 36 30 30
1d 6b 47 08 41 32 33 34 35 36 30 41
1d 6b 48 08 41 30 32 33 34 35 36 41
1d 6b 49 08 41 30 32 33 34 35 36 41
⑥
Status querying Commands
Transmission status
Name Transmission status
Code
ASCII
：
GS r n
DEC
：
29 114 n
HEX
：
1D 72 n
Function
Transmits the status specified by n as follows:
n Function
1, 49 Transmits paper sensor status
Range n = 1, 49
Default None
Notes
When using a serial interface
When DTR/DSR control is selected, the printer transmits only 1 byte after
confirming the host is ready to receive data (DSR signal is SPACE). If the host
computer is not ready to receive data (DSR signal is MARK), the printer will
wait until the host is ready.
When XON/XOFF control is selected, the printer transmits only 1 byte without
confirming the status of the DSR signal.
This command is executed when data is generated in the print buffer.Therefore,
there may be a time interval between receiving the command and sending status,
depending on the status of the receiving buffer.
When Auto Status Back (ASB) is enabled using GS a, the status transmitted by
GS r and the ASB status must be differentiated using.
The status types to be transmitted are shown as below:
Bit Off/On Hex Decimal Status for ASB
0,1 - - - Undefined.