CashConcepts
CCE 335
7
Factory setting
If you want to restore the factory settings, please hold by turning on of the device the "CLR" key pressed and then
confirm once with "RESET". Then the factory settings are loaded again.
Mechanical settings
By the transport and by wear of the transport roles in the upper area a post adjustment of the feeder can be
necessary. At the rear side of the machine is a set wheel which can be easily pressed a little down and changes then
by tricks the pressure on the banknotes. The set wheel must be pressed down while adjusting to prevent
unintentional changing of the pressure.
If the CCE 335 draws not only one but also several banknotes, turn the set wheel in the direction of "-" sign and
during you press the set wheel down.
If the CCE 335 does not draw in the banknotes, turn the set wheel in the direction of "+" sign and during you
press the set wheel down.
