CCE – Cash Concepts Europe GmbH – Kemptener Straße 99 – 88131 Lindau
Tel. +49 (0) 8382 – 943 15 – 0 / Fax +49 (0) 8382 – 943 15 – 20 / [email protected]
CCE 1500 NEO
Short Manual
Dear Customers,
Attached to your new CashConcepts CCE 1500 NEO, you will find a short manual for the operation of the new counterfeit money tester.
A multilingual and detailed manual can be downloaded from our website at:
Product Overview:
Front side:
Rear and bottom side:
1.
LED bar
green = accepted banknotes
red = suspected banknotes
2.
LCD Display
3.
ON/OFF – button
Long press = Clear the display
4.
Clear – button
Short press = Clear the display
5.
Mode – button
Switch between single value (DEN) and total value
(ADD display)
6.
Input shaft for banknotes
7.
Switch to turn the display by 180°
8.
Mini-USB port for power connection and PC
communication
9.
Micro SD slot to update the device
Putting into operation:
Insert the banknotes guide rail on the reverse side of the device in the provided holder.
Connect the USB cable with the power supply and the power supply with the wall outlet.
Connect the adapter to the CCE 1500, if the device should not automatically turn on, press the ON / OFF button for 2
seconds.
The unit performs a self-test after switching on and the display shows the current software version (Cxxx).
Insert the banknotes one by one into the device.
The notes were checked, ejected backwards and the LED bar lights up green.
At counterfeit suspect notes you will be alerted via a warning tone that this note was not accepted and the LED bar flashes
red, the display will also show an error message.
Cleaning the sensors
Due to the banknotes and the depositing of dust, deposits are formed on the machine's sensors. These impurities lead to increased non-
detection of real banknotes. For this reason, please clean the sensors of the CCE 1500 at regular intervals. Use a soft brush to remove
deposits from the sensors and from the banknote conveyors. To do this, insert the brush tip from the front and back into the banknote
transport area to remove the dust. With the help of special cleaning cloths and compressed air spray you can maintain the sensors
optimally. You can also the special cleaning cards and compressed air spray for professional cleaning via our webshop (
