background image

6

IOM-8311HP/LP

NEW REPLACEMENT UNIT:

Contact your local Cashco, Inc., Sales Rep re sen-
 ta tive with the Serial Number and Product code.  
With this information they can provide a quotation 
for a new unit including a complete description, 
price and availability.

7

VIII. ORDERING 

INFORMATION

 

 

NEW REPLACEMENT UNIT vs PARTS  "KIT" FOR FIELD REPAIR 

To obtain a quotation or place an order, please retrieve the Serial Number and Product Code that was stamped 
on the metal name plate and attached to the unit.  This information can also be found on the Bill of Material 
("BOM"), a parts list that was provided when unit was originally shipped.  (Serial Number typically 6 digits).  
Product Code typical format as follows:  (last digit is alpha character that re

fl

 ects revision level for the product).

PARTS "KIT" for FIELD REPAIR:

Contact your local Cashco, Inc., Sales Rep re sen-
 ta tive with the Serial Number and Product code.  
Identify the parts and the quantity required to repair 
the unit from the "BOM" sheet that was provided 
when unit was originally shipped. 

NOTE:

 

  Those part numbers that have a quantity indicated 

under  "Spare Parts" in column "A” re

fl

 ect minimum 

parts required for inspection and rebuild, - "Soft 
Goods Kit".  Those in column “B” include minimum 
trim replacement parts needed plus those "Soft 
Goods" parts from column "A".

If the "BOM" is not available, refer to the cross-
sectional drawings included in this manual for part 
identi

fi

 cation and selection.

A Local Sales Representative will provide quotation 
for appropriate Kit Number, Price and Availability.

          CAUTION

Do not attempt to alter the original construction of any 
unit without assistance and approval from the factory.  All 
purposed changes will require a new name plate with ap-
propriate  ratings and new product code to accommodate 
the recommended part(s) changes.

SECTION VIII

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be 

construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability.  We reserve the right to 

modify or improve the designs or speci

fi

 cations of such product at any time without notice.

Cashco, Inc. does not assume responsibility for the selection, use or maintenance of any product.  Responsibility for proper selection, use and maintenance of any 

Cashco, Inc. product remains solely with the purchaser.

Содержание 8311LP









Отзывы: