Casera PR-803, Инструкция по эксплуатации

Страница: 8 / 12

7
• Your trimmers were carefully examined to ensure that the blades were oiled and aligned before
leaving our factory.
• Blades must be realigned before if they have been removed for cleaning or replacement.
• To realign the blades, simply match the upper and bottom blades teeth up, point to point.
(End of top blade teeth should be approximately 1.2mm back from bottom blade. Compare your
clipper blades with the sketch).
Blade alignment
• If blade alignment is incorrect, add a few drops of oil to the blades, turn trimmer on for a few
moments, turn off and unplug. Loosen screws slightly and adjust. Tighten screws after blade
is aligned.
OILING YOUR BLADES
• To maintain your trimmer in good condition, the blades should be oiled every few haircuts.
• Do not use hair oil, grease, oil mixed with kerosene or any solvent. As the solvent will evaporate
and leave the thick oil which may slow down the blades motion.
1.2mm