Issued 03-16
1001-4
SAFETY
To prevent injury always follow the Warning, Caution
and Danger notes in this section and throughout the
manual.
Put the warning tag shown below on the key for the key-
switch when servicing or repairing the machine. One
warning tag is supplied with each machine. Additional
tags Part Number 331-4614 are available from your
service parts supplier.
This symbol means ATTENTION! BECOME ALERT! YOUR
SAFETY IS INVOLVED. The message that follows the symbol
contains important information about safety. Carefully read the
message. Make sure you fully understand the causes of pos-
sible injury or death.
!
WARNING:
Read the operator’s manual to
familiarize yourself with the correct control
functions.
WARNING:
Operate the machine and
equipment controls from te seat position only.
Any other method could result in serious injury.
WARNING:
This is a one man machine, no
riders allowed.
!
!
!
WARNING:
Before starting engine, study
Operator’s Manual safety messages. Read all
safety signs on machine. Clear the area of
other persons. Learn and practice safe use of
controls before operating.
It is your responsibility to understand and
follow manufacturers instructions on machine
operation, service and to observe pertinent
laws and regulations. Operator’s and Service
Manuals may be obtained from your Case
dealer.
WARNING:
If you wear clothing that is too
loose or do not use the correct safety
equipment for your job, you can be injured.
Always wear clothing that will not catch on
objects. Extra safety equipment that can be
required includes hard hat, safety shoes, ear
protection, eye or face protection, heavy
gloves and reflector clothing.
WARNING:
When working in the area of the
fan belt with the engine running, avoid loose
clothing if possible, and use extreme caution.
WARNING:
When doing checks and tests on
the equipment hydraulics, follow the
procedures as they are written. DO NOT
change the procedure.
WARNING:
When putting the hydraulic
cylinders on this machine through the
necessary cycles to check operation or to
remove air from a circuit, make sure all people
are out of the way.
!
!
!
!
!
